Wan Interface Settings - Using Static Ip; Wan Interface Settings - Using Dhcp - D-Link DFL-1100 User Manual
Network security firewall
Hide thumbs
Also See for DFL-1100:
- User manual (144 pages) ,
- Manual (91 pages) ,
- Installation manual (25 pages)
Table of Contents
Advertisement
WAN Interface Settings – Using Static IP
If you are using Static IP you must fill in the IP address information provided to you by your
ISP. All fields are required except the Secondary DNS Server. The numbers displayed in
these fields are used only as examples.
IP Address – The IP address of the WAN interface. This is the address that may
be used to ping the firewall, remotely control it, and as a source address for
dynamically translated connections.
Subnet Mask – Network and subnet identifier.
Gateway IP – Specifies the IP address of the default gateway used to reach for
the Internet.
Primary and Secondary DNS Server – The IP addresses of your DNS servers,
only the Primary DNS is required.
WAN Interface Settings – Using DHCP
If you are using DHCP, there is no need to enter any values in any of the fields.
Advertisement
Table of Contents
