D-Link DSA-3100 Quick Installation Manual page 3

Hotspot gateway

Hide thumbs Also See for DSA-3100:

Table of Contents

Connecting The DSA-3100 To Your

Network

Ensure that the DSA-3100 is powered ON.

Authentication Port (Public WAN / WLAN) Connection.

Please use a Straight-through Ethernet cable to connect the DSA-3100 to a

switch or a wireless access point to provide public access to your broadband

connection. The Authentication LED light will illuminate to indicate a proper

connection. If the Authentication LED does not illuminate, please check the

device's physical connections.

Insert an Ethernet cable to the

panel of the

DSA-3100. Connect the other end of the Ethernet cable to a switch.

If the Local Network LED illuminates, it means you have a proper connection.

Insert an Ethernet cable into the WAN port on the back panel of the DSA-3100.

Connect the other end to a router or directly to a high speed cable or DSL

modem. If the connection is live, then the WAN LED will illuminate.

Local Network (Private LAN) port on the back

Table of Contents