65: Wireless LAN connection lost
Are any obstacles blocking the line of sight between the
camera and the antenna of the access point?
Move the antenna of the access point to a position clearly visible
from the point of view of the camera (p.153).
The Wi-Fi connection was lost for some reason, and the
connection cannot be restored.
The following are possible reasons: excessive access to the
access point from other device, a microwave oven or similar
appliance in use nearby (interfering with IEEE 802.11b/g/n
(2.4 GHz band)), or influence of rain or high humidity (p.153).
66: Incorrect wireless LAN password
Are the camera and the access point set to use the same
password for authentication?
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct password for authentication
is set on the camera (p.120).
67: Incorrect wireless LAN encryption method
Are the camera and the access point set to use the same
encryption method?
The camera supports the following encryption methods: WEP,
TKIP, and AES (p.109).
If filtering by MAC address is active, is the MAC address of the
camera used registered at the access point?
Register the MAC address of the camera used to the access point.
The MAC address can be checked on the [View info] screen
(p.135).
Responding to Error Messages
145