Table of Contents
Advertisement
Stereo
Selecting the bilingual programmes
1
When a bilingual programme is received,
j Dual appears.
2
Press g to select the sound to be
heard. The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast.
Display
NICAM
j Dual 1
Sub I sound
J Dual 2
Sub II sound
e Mono
Main sound
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence
arises in the low sound volume level, setting the
e Mono 2 mode will mitigate the problem.
1
When a monaural programme is received, e
Mono appears.
2
Press g to select a monaural mode that
is easy to hear. e Mono 1 and e Mono 2
appear cyclically to the screen.
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching
on the e Mono 2 mode.
Adjusting the sound quality
1
From the SOUND menu, press s or r to
select an item you want to adjust.
2
Press v or w to adjust the settings as
required.
Selection
v
Bass
weaker
Treble
weaker
Balance
decreases the
right channel
Using the TV's features
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
Pressing
stronger
stronger
decreases the
left channel
Using the Advanced Sound Settings
Bass Boost helps to create rich bass.
Voice Enhancement helps to emphasize
dialogue. It will be easier to hear voices over
other background audio.
1
From the SOUND menu, press s or r to
select Advanced Sound Settings, and then
press Q.
2
Press s or r to select the item you want to
adjust.
Advanced Sound Settings
Voice Enhancement
Bass Boost
Voice Enhancement : To turn the vocal
Bass Boost :
Using the Stable Sound
The Stable Sound function limits the highest
volume level to prevent extreme changes in
volume when the signal source changes (for
example, to prevent the sudden increase
in volume that often happens when a TV
programme switches to a commercial).
1
From the SOUND menu, press s or r to
select Stable Sound.
2
Press v or w to select On or Off.
Note:
The Stable Sound effect is active only when the
sound outputs from the speaker.
Dynamic Range Control
This feature allows control of compression for
digital audio signal excluding those with MPEG-1
and MPEG-2 audio.
1
From the SOUND menu, press s or r to
select Dynamic Range Control.
2
Press v or w to select On or Off.
Setting the Digital Audio Output
w
1
From the SETUP menu, press s or r to
select AV Connection, and then press Q.
2
Press s or r to select Digital Audio
Output.
On
Off
emphasis effect On
or Off.
To select the desired
bass expansion level
On or Off.
19
Hide quick links:
Advertisement
Table of Contents
