Selecting The Operation Mode (Fax/Copy/Scan); Setting The Original - Panasonic KX-FLB881E Quick Reference Manual

Flat-bed multifunction laser fax
Hide thumbs Also See for KX-FLB881E:
Table of Contents

Advertisement

Important notice for the USB connection
L Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 15).
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.
1.5 Selecting the operation mode
(Fax/Copy/Scan)
You can select the desired mode by pressing one of the
following buttons.
– {FAX} : Select this mode when using the unit as a fax
machine.
– {COPY}: Select this mode when using the unit as a
copier.
– {SCAN}: Select this mode when using the unit as a
scanner for the computer.
Detailed operating instructions are on the CD-ROM.
1. Introduction and Preparation
Document Requirements

1.6 Setting the original

1.6.1 Using the scanner glass
1
Open the document cover (1).
2
Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the l mark points.
3
Close the document cover.
1.6.2 Using the auto document feeder
1
Insert the document (up to 40 pages) FACE UP into
the feeder until a single beep is heard.
2
Adjust the width of the document guides (1) to fit
the actual size of the document.
1
2
1
13

Advertisement

Table of Contents
loading

Table of Contents