Video surveillance 6400 high-definition ip camera (34 pages)
Summary of Contents for Cisco 7530PD
Page 1
Cisco Video Surveillance 7530PD IP Camera Installation Guide September 18, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
Page 2
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Page 3
IP Camera Window Links IP Camera Windows Adjusting the IP Camera Focus and Zoom Powering the IP Camera On or Off Resetting the IP Camera Viewing Live Video N D E X Cisco Video Surveillance 7530PD IP Camera Installation Guide OL-32283-01...
Page 4
Contents Cisco Video Surveillance 7530PD IP Camera Installation Guide OL-32283-01...
Page 5
Obtaining Documentation, Obtaining Support, and Security Guidelines For information about obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed...
Page 6
Cisco Video Surveillance 7530PD IP Camera Installation Guide...
The 7530PD IP camera comes with an advanced P-Iris lens, which controls the iris opening with extreme precision at an optimal level at all times via the built-in stepper motor, resulting in superior sharpness and depth of field as well as image quality.
Page 8
• Hex nut (1) • Double sided tape (1) • Silica gel packet (1) • Extra set of labels (3) • Cisco documentation pointer card (1) • Cisco RoHS document (1) • Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Overview IP Camera Physical Details IP Camera Physical Details Figure 1-1 and the table that follows describe the physical features of the 7530PD IP camera. Figure 1-1 IP Camera Physical Features Varifocal lens IP camera lens that changes focus as the focal length changes.
Page 10
Accepts a standard LAN cable to connect the IP camera to a 10/100BaseT router or switch. 12 GPIO Block General purpose input/output (GPIO) terminal block that is used to connect external input and output devices. For more information, see Figure 1-2. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
GPIO terminal block pin locations and descriptions. Figure 1-2 GPIO Terminal Block Pin Locations and Descriptions Description 24 VAC 24 VAC RS485– RS485+ DI– DO– The maximum output load from pins 7 and 8 is 50mA. Note Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 12
Chapter 1 Overview General Purpose I/O Terminal Block Cisco Video Surveillance 7530PD IP Camera Installation Guide...
C H A P T E R Camera Installation This chapter provides information and instructions for installing the Cisco Video Surveillance 7530PD IP Camera, and includes the following topics: Installation Guidelines, page 2-1 • Warnings Before Installation, page 2-1 •...
Page 14
Do not place the IP Camera in high sunlight. humidity environments. Do not place the IP Camera on unsteady Do not touch the IP Camera during a • • surfaces. lightning storm. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 15
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353 Inline power circuits provide current through the communication cable. Use the Cisco provided cable or Caution a minimum 24AWG communication cable.
Perform the following steps to install and connect an RJ45 Ethernet cable. Step 5 We recommended using 24AWG (0.51 mm) gauge cable. Note Drill a hole on the rubber seal plug and insert an Ethernet cable (without a connector) through the opening. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 17
BR: brown solid Press the Ethernet cable into the routing path at the bottom of the camera so that the cable will not get in the way when the metal mounting plate is attached. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 18
Feed the power cable through the waterproof connector (F --> E --> D --> B --> A). Be sure to feed enough power cable length through the waterproof connector to connect the power cable to the GPIO block. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 19
Connect the power and I/O cables to the GPIO terminal block. Description 24 VAC 24 VAC RS485– RS485+ DI– DO– Step 7 Use the included L-type wrench to secure the conduit base to the mounting plate with the three included screws. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 20
The primary video stream frame rate must be set higher than 15 fps. The secondary video stream must is enabled. • We recommend that you disable analog video after installation. To disable analog video, see the Cisco Note Video Surveillance 6000 Series IP Camera Configuration Guide.
Page 21
Attach the dome cover to the camera by aligning it with the mounting holes. Step 12 Use the included wrench and tighten the four dome cover screws to secure the dome cover to the camera. Make sure all parts of the camera are securely installed. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 22
After completing the initial setup, use the IP camera user interface to adjust the focal length and zoom factor. For more information, see the “Adjusting the IP Camera Focus and Zoom” section on page 4-3. Cisco Video Surveillance 7530PD IP Camera Installation Guide 2-10...
To connect to the IP camera for the first time and make initial configuration settings, perform the following steps. You can change these configuration settings in the future as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide.
Page 24
• If you are prompted to install ActiveX controls, which are required to view video from the IP camera, Step 8 follow the on-screen prompts to do so. The Home window appears. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Table 4-1 Links in the IP Camera Windows Link Description Privilege Level Refresh Updates the information in the window that is currently displayed. Administrator User Home Displays the Home window. Administrator Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Method by which the IP camera obtains its IP address. LAN IP IP address of the LAN to which the IP camera is connected. Subnet Mask Subnet mask of the LAN to which the IP camera is connected. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
While watching the video pane, perform the following steps: Move the Zoom slider until you achieve the desired zoom level. Move the Focus slider until the video image is at its sharpest. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
There are various reset types, as described in Table 4-3. You also can also perform these reset operations from the Maintenance Settings window as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide. Table 4-3 Resetting the IP Camera Reset Type...
Viewing Live Video Viewing Live Video After you install and set up the Cisco Video Surveillance IP Camera, you can connect to the IP camera through Internet Explorer and access the Camera Video & Control window to view live video.
Page 30
Speaker toggle button camera to the PC that you are using. The button changes to the Enable Speaker button Click the Enable Speaker button to unmute audio. The button changes to the Disable button. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 31
To control contrast of the video image, drag the slider to select a value from 1 through 10. A higher value increases the contrast and a lower value decreases the contrast. The default value is 5. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 32
If the Flickerless check box is not checked, the minimum exposure value is 1/32000 and the maximum value is 1/5. If the Flickerless check box is checked, the minimum exposure value is 1/120 and the maximum value is 1/5. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 33
To remove a region, left-click it, then right-click it and choose Delete Region. BLC—Back Light Compensation causes only the middle part of the IP • camera image, indicated by a white dashed rectangle, to be considered for the exposure calculation. Cisco Video Surveillance 7530PD IP Camera Installation Guide...
Page 34
Choose Low, Medium, or High to specify the relative adjustment that the IP camera makes between the light and dark parts of an image. Gamma Curve Select a gamma curve value to adjust the monitor gray-scale for video from the IP camera. Cisco Video Surveillance 7530PD IP Camera Installation Guide 4-10...
Page 35
Region Type line. Alternatively, you can double-click Inclusion or Exclusion to toggle between these values. Inclusion—The IP camera examines this region for motion – Exclusion—The IP camera ignores motion in this area – Cisco Video Surveillance 7530PD IP Camera Installation Guide 4-11...
Page 36
Reset button Click to set the zoom and focus controls to their default values. When the process completes, click OK in the dialog box that displays the message “Settings reset successfully.” Cisco Video Surveillance 7530PD IP Camera Installation Guide 4-12...
Page 37
To remove a region, left-click it, then right-click it and choose Delete Region. Region Color Choose the color in which the system displays the zones that are defined by drop-down menu privacy regions. You can choose Red, Green, Black, or Blue. Cisco Video Surveillance 7530PD IP Camera Installation Guide 4-13...
Page 38
IsActive, then choose True (mask the region) of False (do not mask the region) from the drop-down menu that appears on the IsActive line. Alternatively, you can double-click True or False to toggle between these values. Cisco Video Surveillance 7530PD IP Camera Installation Guide 4-14...
Page 39
DHCP, obtaining IP address through installation GPIO terminal block mounting to ceiling or wall warnings factory reset waterproof connector focus and zoom, controls 4-12 logging out of powering off Cisco Video Surveillance 7530PD IP Camera Installation Guide IN-1...
Page 40
IP camera powering on the IP camera warnings before installation Power over Ethernet (PoE) waterproof connector Power over Ethernet (PoE) rebooting, IP camera Refresh link reset factory default values Cisco Video Surveillance 7530PD IP Camera Installation Guide IN-2...