Table of Contents
Advertisement
Item
[ATW]
[AF]
[RECORDING SETUP]
These are various types of setting items when performing camera recording and playback.
Set the system frequency, the number of lines, recording format, and recording method.
Item
[REC MEDIA]
[FILE SPLIT]
[RECORDING]
[RECORDING
[RECORDING HOLD]
SETTING]
[ONE SHOT TIME]
[INTERVAL TIME]
[START DELAY]
[PRE REC]
[ONE CLIP REC]
[SIMUL REC]
[DUAL CODEC
[REC MEDIA]
SETTING]
[PROXY MODE]
[PROXY DISP]
[START TEXT MEMO]
Chapter 6 Menu Operations — Menu list
Sets the operations of the auto tracking white balance function.
[ON]: Activates the auto tracking white balance function when in auto mode. The [ATW] function cannot be
enabled/disabled with the <WHITE BAL> switch or USER buttons. However, if [ATW LOCK] is assigned to
a USER button, the white balance value can be fixed with the USER button.
[OFF]: Does not perform the operation of the [ATW] function when in auto mode. Performs the operation of
the white balance function selected with the <WHITE BAL> switch.
f Factory setting: [ON]
Sets the operation of the auto focus.
[ON]: Performs the operation of auto focus when in auto mode. The <FOCUS> switch does not work.
[OFF]: Does not perform the operation of auto focus when in auto mode. Activates the focus function
selected with the <FOCUS> switch.
f Factory setting: [ON]
Selects the slot for the media to be recorded.
[microP2]: Uses microP2 memory cards (slots 1 and 2).
[P2]: Uses P2 memory card (card slot 3).
f Factory setting: [microP2]
Selects whether to divide the recording file in 4 GB units or one file when recording in the microP2 memory
card (that exceeds 32 GB) in AVC-LongG format.
[ONE FILE]: Records in one file.
[SPLIT]: Splits the clip every 4 GB.
f Factory setting: [ONE FILE]
Selects the recording format.
[NORMAL]: Performs standard recording.
[INTERVAL]: Performs interval recording.
[ONE SHOT]: Performs one-shot recording.
[LOOP]: Performs loop recording.
f Factory setting: [NORMAL]
Selects whether to hold [RECORDING] settings.
[ON]: Holds the settings.
[OFF]: Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.
f Factory setting: [OFF]
Sets the recording duration of one-shot recording.
[1frm], [2frm], [4frm], [8frm], [16frm], [1s]
f Factory setting: [1frm]
Sets the interval duration for interval recording.
[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
f Factory setting: [2frm]
Selects whether to delay the recording start time by approximately one second when performing interval
recording or one-short recording.
[ON], [OFF]
f Factory setting: [OFF]
Selects whether to perform pre-recording. If [ON] is selected, pre-recording is performed for approximately
three seconds in HD, and for approximately seven seconds in SD.
[ON], [OFF]
f Factory setting: [OFF]
Selects whether to perform one-clip recording.
[ON], [OFF]
f Factory setting: [OFF]
Selects whether to perform simultaneous recording.
[ON], [OFF]
f Factory setting: [OFF]
Selects media for recording proxy data.
[P2]: Records proxy data to a P2 card.
[P2&SD]: Records proxy data to both of a P2 card and SD memory card.
[OFF]: Does not record proxy data.
f Factory setting: [OFF]
Sets the recording mode of proxy data.
[LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV]
f Factory setting: [HQ 2CH MOV]
Selects whether to display proxy data recorded information or messages in the viewfinder and LCD
monitor.
[ON]: Displays proxy recording information and SD memory card remaining capacity at the start of
recording. Warning information is displayed at all times.
[OFF]: Displays proxy and SD memory card warning information for only three seconds when warning
occurs.
f Factory setting: [OFF]
Selects whether to automatically add a text memo at recording start position each time recording is started.
[ON], [OFF]
f Factory setting: [OFF]
– 127 –
Description of settings
Description of settings
Advertisement
Table of Contents
