Table of Contents
Advertisement
the display upright as the monitor is moved between its portrait and
landscape positions.
The following DDC/CI commands should be supported via command
line:
No. Commands
1
Set Brightness
2
set Contrast
3
Set Red Gain
4
Set Green Gain
5
Set Blue Gain
6
Get Brightness
7
Get Contrast
8
Get Red Gain
9
Get Green Gain
10 Get Blue
HDMI with One Wire
Set the display to follow CEC control.
• {Off} – Disable CEC. (Default)
• {On} – Enable CEC.
Smart power
Set the display to reduce the power consumption automatically.
The options are: {Off} / {Medium} / {High}.
Auto signal detection
Choose to let the display detect and display from available video inputs
automatically.
This function takes place only when there is no signal connected at the
input port you designate for auto-detection.
The options are: {Off} / {All} / {PC sources only} / {Video sources
only} / {Failover}
• {Off} – Disable Auto signal detection.
• {All} – Search order: Displayport DVI-D VGA HDMI
Component Composite Card OPS (for supported OPS
models)
• {PC sources only} – Search order: Displayport DVI-D VGA
HDMI Card OPS (for supported OPS models)
• {Video sources only} – Search order: HDMI Component
Composite .
• {Failover}
-
Failover 1: User-defined setting. Default:HDMI.
-
Failover 2: User-defined setting. Default:HDMI.
-
Failover 3: User-defined setting. Default:HDMI.
-
Failover 4: User-defined setting. Default:HDMI.
-
Failover 5: User-defined setting. Default:HDMI.
-
Failover 6: User-defined setting. Default:HDMI.
-
Failover 7: User-defined setting. Default:HDMI.
APM (Advanced Power Management)
Turn on or off the automatic power management setting.
• {Off} – Shutdown power directly if no signal detected. (Default)
• {On} – Enter power saving mode if no signal detected.
OPS settings
Set the OPS configuration under each power condition.
• {Auto} – After selecting {Card OPS} for video source input, the
OPS will be set to off when the display power is set to off, or set to
on when the display power is set to on. When set to other video
source inputs, the OPS will always be set to on.
• {Always off} – The OPS will always be set to off.
• {Always on} – The OPS will always be set to on.
Advanced option reset
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
Reset all settings in the Advanced option menu to factory preset values.
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the [SET]
button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the [SET]
button to cancel and then return to the previous menu.
23
Date and time
Action
Schecule
Action
Monitor
Action
DDC/CI
On
HDMI with One Wire
Off
Smart power
Off
Auto signal detection
Action
APM
Off
OPS settings
Always on
Advanced option reset
Action
BDL4256ET
Advertisement
Table of Contents
Troubleshooting
