Table of Contents
Advertisement
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing (
2
Select the required frequency band by pressing TUNER/BAND
again on the front panel or BAND on the remote control.
Result: The appropriate indication is displayed:
FM
MW
LW
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
" Selecting a Stored Station " .
4
Select the station to be stored by:
Pressing
or
buttons on the front panel or
buttons on the remote control to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result: The PROG is displayed for a few seconds.
b Pressing
or
buttons on the front panel or
buttons on the remote control to assign a program number .
c Press PROGRAM/SET to store the radio station.
Result: PROG is no longer displayed and the station is stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
2
4
5
2
4
5
5
).
Frequency Modulation
Medium Wave
Long Wave
Press TUNING MODE
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
or
or
buttons.
or
3
4
5
4
5
3
Selecting a Stored Station
You can listen to a stored radio station as follows:
1
Switch the system on by pressing (
2
Select the required frequency band by pressing TUNER/BAND on
the front panel.
3
Select the radio station as follows.
To listen to ...
Press ...
Stored station
1. the TUNING MODE button until
2.
1
2
3
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press MO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
) .
"PRESET" is displayed.
or
button to select the
required program.
3
3
15
GB
Advertisement
Table of Contents
