Table of Contents
Advertisement
ID CARD COPY
You can copy the front and back sides of ID card onto a page through this function, which can be used as margin
shift function, too. The specified patterns of ID card copy are shown as follows.
To use the ID card copy function, attach the supplied [ID CARD] key label on the MARGIN SHIFT key.
Pattern 1
Front
Back
• Select the layout patterns as explained in
Note
below to perform the copy. For changing a system setting, refer to
SETTING"
(p.74).
• ID card copy feature cannot be used in combination with interrupt copy, two-sided copy, dual page copy,
XY-zoom, margin shift, edge + centre erase, 2 in 1/4 in 1, sort/group and rotation copy functions.
• The following paper sizes can be used: A5, A5R, A4, A4R, B4, B5, B5R, A3 (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R,
8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"). (A5, A5R (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R) can only be used
in bypass tray.)
• When using Pattern 1, the image may cut off even if using standard paper size.
• In ID card copy mode, scan area and scan number (1 page) cannot be changed. Scan area is: X: 54 + 5 mm
(1/4") (margin), Y: 86 + 10 mm (1/2") (top margin 5 mm (1/4") and bottom margin 5 mm (1/4")).
• Auto paper selection and auto tray switch are invalid in ID card copy mode. Please select paper and tray
manually.
• Only making a single copy is available (Number of copies cannot be set.).
1
Press the [ID CARD] key.
2
Place the ID card on the document
glass, align with the ID card mark, and
press the [START] key (
When scan is finished, ORIGINAL DATA
indicator will blink and one side of the ID card is
scanned into memory. (In this case, print will start
if pressing [READ-END] key (
Centre Line
"ID card"
The ID CARD COPY
indicator will light up. The
exposure is set to [text],
the exposure level is set
to "3", and the number is
set to "1" automatically.
).
).)
Pattern 2
of SYSTEM SETTINGS
(p.73)
"SELECTING A SETTING FOR A SYSTEM
3
Turn the ID card to the other side, and
press the [START] key (
When scan finished, Copy will begin.
To cancel ID card copy, press the [CLEAR
Note
ALL] key (
) and make sure the ID CARD
COPY indicator is off.
COPY FUNCTIONS
first, then follow the steps
).
47
3
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
