Nokia Easy Mount HH-12 Introduction Manual page 5
Hide thumbs
Also See for Easy Mount HH-12:
- User manual (31 pages) ,
- Manual (27 pages) ,
- Manual (26 pages)
Advertisement
cup and the windshield. Check that
the suction cup is firmly attached.
To detach the mounting device from
the windshield, carefully push the
Set to the desired position
Do not adjust the mounting device
while driving.
To set the top of the mounting device
to the desired position, loosen the
two screws in the middle of the
mounting device, turn the top to the
desired position, and tighten the
Mount the mobile holder
To attach a compatible Nokia mobile
holder to the mounting plate, use the
screw supplied with the holder.
To use the CR-86 mobile holder,
remove the protection plate with the
locking lever toward the top of the
mounting device (3), and pull the
strap located on the edge of the
suction cup (4).
screws (5). Ensure that the top of the
device is firmly locked into place.
To set the mounting plate at the top
of the mounting device to the desired
position, loosen the screw below the
plate, turn the plate to the desired
position, and tighten the screw (6).
Nokia text from the holder, attach the
holder to the mounting plate with the
supplied screw, and replace the
protection plate (7). To insert your
mobile device into the holder, slide it
into the holder from the side (8). To
ENGLISH
Advertisement
