Advertisement
HP StreamSmart 410 Quick Start Guide
In Figure 1-9, the cropping tools have been
used to select three cycles of the data.
10. Once the final data set has been
selected, it is ready to be exported for
statistical analysis. For the HP 39/40gs,
press the right-arrow menu key, followed
by the OK menu key to see Figure 1- 1 0. If
you are using the HP 50g, press the NXT
key and then the OK menu key to see
Figure 1- 1 1. In either case, the Export
menu allows you to select the columns
used for storing your data. Usually, the
default settings shown are the best.
1 1. Press the OK menu key to accept these default settings.
12. You will see a message informing you
that your data has been exported and all
other data has been deleted. Press any
key to continue. On the HP 39/40gs,
you will find yourself in the Statistics
Aplet, as shown in Figure 1- 1 2.
On the HP 50g, the message tells you
that your data has been saved in the
Σ
reserved variable,
press the VAR key, followed by the
Σ
DAT menu key, then the down-cursor
key to view the data (Figure 1- 1 3). The
columns have been widened here to
show the data.
In Algebraic mode, press the VAR key,
Σ
followed by the
the ENTER key. Press the down-cursor key
to view the data.
For more information on using the StreamSmart 410 to perform
experiments, refer to the user's guide on the product CD included in
your StreamSmart 410 package.
For more information about analyzing your data, refer to the user's
guide of your HP calculator.
User manuals, user guides, and other information about HP calculators
can be found at www.hp.com/calculators.
6
DAT. In RPN mode,
DAT menu key, then
Figure 1-9
Figure 1- 1 0
Figure 1- 1 1
Figure 1- 1 2
Figure 1- 1 3
Advertisement
