Brother DCP-J552DW Service Manual page 260
Hide thumbs
Also See for DCP-J552DW:
- Basic user's manual (124 pages) ,
- Quick setup manual (31 pages) ,
- Advanced user's manual (92 pages)
Table of Contents
Advertisement
(6) Press the [Mono Start] key.
The machine displays "Please wait" on the LCD.
Note • Never remove the external memory from the machine when updating is in progress.
• If this procedure has been started by the user in maintenance mode, the machine returns to
the standby state after showing "Please wait" on the LCD.
(7) Wait for the machine to return to the initial stage of the maintenance mode and show
"**** Active" on the LCD, remove the external memory and store it in a safe place.
Note
If any of the error messages listed below appears, press the [Stop] or [X] key, and the
machine returns to the initial stage of the maintenance mode.
Error Message
Card is used
Insert Card
No file
Card Error
Machine ID Error
Write Error
Restoration procedure
(1) Insert the external memory containing the backup data into the slot of the machine in the initial
stage of the maintenance mode. The machine displays "**** Active" on the LCD. ("****"
shows the name of the external memory inserted.)
Note • Do not insert more than one external memory at a time.
• If the serial number in the backup data stored in the external memory does not match that
of the machine, data restoration cannot be performed.
(2) Press the [4] and [6] keys in this order.
The machine displays "Export to Card" on the LCD.
(3) Press the [ ] or [ ] key until the desired item, any of the following, appears on the LCD.
"Import from Card" for restoring only user setting information.
"Import all" for restoring all backup data including machine information.
(4) Press the [Mono Start] key.
The file name "********.msd" appears on the LCD.
The "********" is unique to each model.
(5) Press the [Mono Start] key.
The machine again displays "Import from Card" or "Import all" on the LCD.
(6) Press the [Mono Start] key.
The machine displays "Please wait" on the LCD.
Note Never remove the external memory from the machine when updating is in progress.
(7) Wait for the machine to automatically return to the initial stage of the maintenance mode and
show "**** Active" on the LCD.
Note
If any of the error messages shown in "Backup Procedure" appears, press the [Stop] or [X]
key to return the machine to the initial stage of the maintenance mode.
The external memory is being used by another operation.
No external memory is inserted.
File name is invalid. No "BROTHER" folder exists.
External memory failure.
Mismatch of serial numbers between the machine and the backup
data (which is detected only in data restoration).
Insufficient free space in external memory.
5-28
Causes
Confidential
- Quick Links:
- Printer
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
