Table of Contents
Advertisement
Bosch Rexroth AG
Mounting, Dismounting and Electrical Installation
There is a defined assignment of the UPS function to the XUSB2 USB in‐
terface for firmware version 01VRS. Therefore do not assign another func‐
tion to this USB interface.
10
Mounting, Dismounting and Electrical Installation
10.1
Installation Notes
● Install the panel PC in a way that ensures access to the connector panel (top side).
● The LED displays on the connector must not be covered.
● Provide a sufficient space of 50 mm (on all sides of the device) for sufficient cooling
and cable routing.
● Use strain reliefs for all cables.
● Keep as much distance as possible to noise sources.
Maintenance Distances
For maintenance the following distances must be kept:
● 200 mm for opening the housing cover.
● 150 mm for the DVD drive and the installation of extension cards.
See the following figure:
Fig.10-1: Maintenance distances
22/43
DOK-SUPPL*-VSP*XX.3***-IT01-EN-P
Rexroth IndraControl VSP xx.3 Panel PC
150 mm
200 mm
Advertisement
Table of Contents
