Lenovo ThinkSystem SD530 Manual page 42

Server with intel xeon sp (1st, 2nd gen) uefi manual
Hide thumbs Also See for ThinkSystem SD530:
Table of Contents

Advertisement

Physical Presence State
Toggle Remote Physical
Presence Assert
Secure Boot Configuration
Item
Physical Presence
Secure Boot Status
Secure Boot Mode
38
ThinkSystem Server with Intel Xeon SP (1st, 2nd Gen) UEFI Manual
If Hardware Physical Presence Jumper is Asserted, the
• Hardware Physical
only way to de-assert Physical Presence is to change the
Presence
jumper on the planar.
Asserted
• Remote Physical
Asserting allows Physical Presence to be set for a
Presence
duration listed in minutes even if Hardware Physical
Asserted
Presence Jumper is not asserted. Asserting does not
require a reboot.
• Hardware and
Remote Physical
Both the Hardware Physical Presence Jumper on the
Presence are
planar and the Remote Physical Presence are Asserted.
Asserted
• De-asserted
De-asserting turns off Physical Presence (unless the HW
Physical Presence Jumper is asserted). De-asserting
does not require a reboot.
De-asserted is the default setting
N/A
Switch the Remote Physical Presence between Assert
and De-assert when "Physical Presence Policy" is
enabled.
The option is NOT modifiable when "Physical Presence
Policy" is disabled.
Options
Description
Display the current Physical Presence status.
• Asserted
• De-asserted
Physical Presence is a form of authorization to perform
certain security functions. [Asserted] means being
authorized.
"Secure Boot Setting" and "Secure Boot Policy" is
modifiable when "Physical Presence" is asserted.
De-asserted is the default setting
Note: When the setting is De-asserted, the whole page is
grayed.
Display the current secure boot status. Disabled is the
• Disabled
default setting.
• Enabled
System will do secure boot authentication when "Secure
• Setup Mode
Boot Mode" is [User Mode] and secure boot is enabled.
• User Mode
User Mode is the default setting.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents