Cable Gland - Siemens SITRANS DA400 Operating Instructions Manual
Process monitoring
Hide thumbs
Also See for SITRANS DA400:
- Operating instructions manual (86 pages) ,
- Operating instructions manual (68 pages) ,
- Operating instructions manual (104 pages)
Table of Contents
Advertisement
Connecting
5.3 Cable gland
5.3
Cable gland
General procedure
The leads are generally connected as follows:
1. Unscrew the cover and place it next to the device.
2. Loosen the cable gland.
3. Remove the sealing stopper.
4. Connect the desired lead.
5. Tighten the cable gland.
Arrangement of cable glands
Figure 5-1
①
②
③
④
⑤
⑥
⑦
See also
Connecting structure-borne sound sensors (Page 27)
Connecting the power supply (Page 32)
26
Arrangement of cable gland
Cable gland for digital outputs "DO 1" to "DO 6"
Cable gland for signal inputs "In 1" and "In 3"
Cable gland for signal inputs "In 2" and "In 4"
Cable gland for PROFIBUS
Cable gland for sensors 2 and 4
Cable gland for sensors 1 and 3
Cable gland for power supply L+ and L- and earthing
SITRANS DA400 for material flow monitoring with protection against explosion
Operating Instructions, 09/2007, A5E00841152-01
Advertisement
Table of Contents
