Canon PIXMA Pro9500 Series Quick Start Manual page 59
Canon pixma pro9500: quick start
Hide thumbs
Also See for PIXMA Pro9500 Series:
- Quick start manual (115 pages) ,
- Manual (31 pages) ,
- Setup instructions (2 pages)
Table of Contents
Advertisement
Print Head Cleaning starts when the POWER lamp starts blinking blue.
Do not perform any other operations until the Print Head Cleaning
finishes. This takes about 120 seconds.
(5) Load a sheet of Letter-sized plain paper in the Auto Sheet Feeder.
(6) Confirm the displayed message and click Print Check Pattern to print the nozzle
check pattern.
The nozzle check pattern is printed.
5
Check the Print Head condition with the printed nozzle check pattern.
See
"Examining the Nozzle Check Pattern"
If the problem remains after performing Print Head Cleaning twice, try
Print Head Deep Cleaning.
See
If other than Letter-sized paper is loaded, you cannot print the
nozzle check pattern. Be sure to use Letter-sized plain paper.
Do not perform any other operations until the nozzle check pattern
printing finishes.
The nozzle check pattern will not be printed correctly if there is not
enough ink. Replace the ink tank if the remaining amount of ink is
insufficient.
See
"Replacing an Ink Tank"
"Print Head Deep Cleaning"
Printing Maintenance
(3) Select the ink group to clean.
Clicking Initial Check Items
displays the items to be checked
before cleaning.
(4) Click OK.
on page 34.
on page 50.
on page 56.
55
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
