Canon Color imageCLASS MF9170c Service Manual page 293
Hide thumbs
Also See for Color imageCLASS MF9170c:
- Basic operation manual (504 pages) ,
- Starter manual (60 pages)
Table of Contents
Advertisement
Chapter 16
Sub item
CNT-DATE
Setting of the date and time to start sending counter information to the server
Set the date and time to start sending counter information to the server using the E-RDS third-party extended function.
Refer to the date and time setting in the user mode.
(12 digits: YYYYMMDDHHMM)
YYYY: Year, MM: Month, DD: Day, HH: Hour, MM: Minute)
Setting range: 2000/1/1 00:00 to 2037/12/31 23.59
[Factory setting value/Value after RAM clearing: 000000000000]
CNT-INTV
Setting of the interval for sending counter information to the server
Set the interval of sending counter information to the server using the E-RDS third-party extended function.
Setting range: 1 to 168 (Unit: 1 week)
[Factory setting value/Value after RAM clearing: 24]
STRD-POS
Automatic detection of the DF stream reading CCD reading position
Execute this item after performing any of the replacement of the ADF unit, replacement of the reader unit, or RAM clearing for the scanner.
[Operation]
Å@The reading position is adjusted while the scanner continues to move by 0.1 mm.
[Time]
Å@When the lamp lights up: Adjustment time: 10 sec
When the lamp does not light up: Lamp adjustment time of 10 to 30 sec + Adjustment time of 10 sec
[Displays]
0: Operating / 1: OK / 2: NG
<ATTRACT>
Not used
<DPC>
Not used
<CST>
Not used
<CLEANING>
Not used
<FIXING>
Not used
<PANEL>
Sub item
LCD-CHK
Not used
LED-CHK
Not used
LED-OFF
Not used
KEY-CHK
Not used
<PART-CHK>
Not used
<CLEAR>
Sub item
R-CON
TEL-USER
SRVC-DAT
COUNTER
TYPE
HIST
ACT-HIST
ACC-HIST
JAM-HIST
ERR-HIST
ALARM
ENV-HIST
16-12
COPIER > FUNCTION > INSTALL
COPIER > FUNCTION > PANEL
COPIER > FUNCTION > CLEAR
Not used
Clearing of user data and data registered in the address book
SSSW is not cleared.
Clearing of SERVICE DATA
User data is not cleared.
Clearing of the maintenance/parts counter and mode counter to 0
Clear the counter (numerator) on the system dump list to 0.
Initialization of USER DATA and SERVICE DATA for the specified destination setting
Japan: JAPAN
USA: U.S.A.
Europe: EUROPE 1(area) / U.K. / SWEDEN / SWISS / AUSTRIA / DENMARK / NORWAY / HOLLAND / BERUGIUM /
FINLAND / ITALY / SPAIN / PORTUGAL / IRELAND / HUNGARY / SAF / GERMANY / FRANCE / CZECH / SLOVENIA /
PORLAND / GREECE/ LUXEMBOURG / RUSSIA / EUROPE 2(area)
Australia: AUSTRALIA / N.Z.
China: CHINA
Korea: KOREA
Taiwan: TAIWAN
Asia: SINGAPORE / HONG KONG / MALAYSIA / ASIA(area)
Note) STANDARD / CANADA are not in use.
Clearing of the communication management history
Clearing of the print history
Clearing of the jam history
Clearing of the error (E code) history
Not used
Not used
Description
T-16-10
Description
T-16-11
Description
Advertisement
Table of Contents
