Projector Placement
We recommend adjusting the projection angle and setting the focus
and zoom at least 20 minutes after you start projecting, because images
are not stable right after turning on the projector.
a
a
Press the power button on the remote control to turn on the projector.
b
Loosen the ball joint screw using a hexagonal wrench.
Attention
• If you loosen the screw while the projection unit is tilted, the projection
unit may move suddenly under its own weight. When loosening the
screw, make sure you support the projector's projection unit so that the
projector does not move suddenly.
• Do not grip the ball joint when loosening the screw. Otherwise, your
fingers could get trapped.
c
Adjust the projection angle.
22