Advertisement
Quick Links
Quick Start Guide — KITEVSMMC2107
MMCMPFB1200 Platform Board
J18
J19
J17
F1
W1 W2 W3 W4
J5
DS2
DS3
W7
W8
W9
J7
J9
Breadboard Areas
J11
J13
P1
J15
Install GNU Tools
1.
Insert the CD-ROM into your CD-ROM drive.
The install shield should begin automatically.
(If the install shield does not start automatically,
click on the Start button and select Run. Then
use the Run dialog box to run file Autorun.exe
of the CD-ROM.)
An M • CORE install screen appears. Click on the
2.
M • CORE Tools button to bring up a second
screen.
KITEVS2107QS/D
Quick Start Guide
Freescale Semiconductor, Inc.
Evaluation System
J21
W5
U1
J24
J20
LCD display location
J6
W6
DS1
J29
W10
J8
J10
P3
J12
P4
J14
P3
P2
J16
Breadboard
Area
For More Information On This Product,
Go to: www.freescale.com
3.
Click on the Install GNU Tools button, then
follow the instructions of successive screens to
install the tools into the default directory.
An installation-complete message indicates
successful installation.
4.
Click on the OK button of the message box to
return to the second screen, then click on the
Exit button.
NOTE: If the GNU tools do not work after
installation your initial environment space may
be too small: it should be at least 4096 bytes.
(The way to make this setting may be different
for each system. For assistance, refer to your
Windows documentation, to Microsoft technical
support, or to Motorola technical support.)
Connect Your Boards
1.
Make sure that all switches and jumper headers
of your MPFB1200 and CMB2107 have the
factory configuration.
2.
Place the MPFB1200 on your work surface.
Hold the CMB2107 directly above the
MPFB1200. Orient the CMB2107 to align the
silk-screen right-triangle markings, at the ends
of the boards' MAPI connectors P1 and P2.
3.
Press the boards together, so that CMB2107
MAPI connectors J1 through J4 (on the bottom
of the board) connect with corresponding
MPFB1200 MAPI connectors P1 through P4.
Connect Boards to Your System
1.
Connect the RS-232 cable between CMB2107
connector J58 and the serial port of your
computer. (If appropriate, use the DB9/DB25
adapter.)
2.
Connect the +12-volt power supply to
MPFB1200 connector J17. (Do not connect a
power supply directly to the CMB2107: the
platform board supplies CMB power through the
MAPI ring.)
June 2000
MOTOROLA
1
Advertisement
Related Manuals for Motorola MMCMPFB1200
Summary of Contents for Motorola MMCMPFB1200
- Page 1 (The way to make this setting may be different for each system. For assistance, refer to your Breadboard Areas Windows documentation, to Microsoft technical support, or to Motorola technical support.) Connect Your Boards Make sure that all switches and jumper headers of your MPFB1200 and CMB2107 have the factory configuration.
- Page 2 This runs a batch file that sets up your application Motorola reserves the right to make changes to any products herein to improve functioning or design. Although the environment. (Leave the MS-DOS window open information in this document has been carefully reviewed and for later use.)