Toro Reelmaster 3100-D Service Manual page 176
Hide thumbs
Also See for Reelmaster 3100-D:
- Service manual (342 pages) ,
- Operator's manual (104 pages) ,
- Installation instructions manual (16 pages)
Table of Contents
Advertisement
Installing the Rear Wheel Motor
Hydraulic System: Service and Repairs
(Figure
5. Remove caps and plugs from wheel motor fittings and hoses. Using labels
placed during motor removal, properly connect hydraulic lines to motor (see
Installing Hydraulic Hoses and Tubes (O-Ring Face Seal Fittings) (page
5–6)).
6. Install the wheel assembly to machine and secure with four (4) lug nuts.
7. Lower the machine to the ground.
8. Make sure that the lock nut is torqued from 345 to 372 N·m (255 to 275
ft−lb). Also, make sure that the wheel lug nuts are torqued from 61 to 88
N·m (45 to 65 ft−lb).
9. Make sure hydraulic tank is full. Add correct fluid if necessary.
80) (continued)
Page 5–100
Reelmaster
®
3100-D/3105-D
20252SL Rev A
Advertisement
Chapters
Table of Contents
