LG S3RERB Owner's Manual page 46
Hide thumbs
Also See for S3RERB:
- Owner's manual (133 pages) ,
- Service engineering manual (132 pages) ,
- Owner's manual (46 pages)
Table of Contents
Advertisement
Available languages
Available languages
46
MAINTENANCE
Smoke comes out
when the door is
opened
Full water supply tank
is empty after just one
use
Appliance makes a loud
vibrating noise on startup
[Drying times are taking
longer than estimated?]
Appliance is moving from
left to right while
operating
Sound of motor whirring
Sound of water running,
boiling, or hissing
Steam or hot air leaks out
when the door is closed
The appliance won't
operate
Door is opened during operation
Appliance is being used for the
first
Moving hanger is balancing load
before operation
Clothes were extremely wet
when loaded
Floor under appliance is not level
or is not sturdy enough to
support the weight of the
appliance without
Compressor is running during
drying
Steam being generated and
sprayed onto clothes
An item is caught in the door,
keeping it slightly open
Control panel has powered off
due to inactivity
Cord is unplugged
Circuit breaker/fuse is tripped/
blown
Appliance not connected to
120 V socket
It is normal for steam or hot air to escape if
the door is opened during operation.
A larger amount of water is needed the first
time
This is normal at the beginning of the cycle. If
the noise increases or continues for a long
time, call for service.
Drying times may be longer for very wet or
bulky clothing. Damp dry clothes before
putting them in the Styler. The Styler stops
automatically when clothes are dry.
Install
flexing
any slight unevenness
Leveling the Styler, page 16.
This is normal.
This is normal.
Make sure all items are completely inside the
cabinet and nothing is caught in the door,
blocking it from closing completely.
This is normal. Press the Power button to turn
the appliance on.
Make sure cord is plugged securely into a working
outlet.
Check house circuit breakers/fuses. Replace
fuses or reset breaker. The appliance should be
on a dedicated branch circuit.
Make sure the cord is plugged into a grounded
socket rated for this appliance.
See the Product Specifications, page 12.
time
the
used
to
the
empty reservoir.
the
appliance where
the
floor
level and sturdy. Compensate for
the
floor
the
leveling legs. See
appliance is
fill
is
in
with
Advertisement
Chapters
Table of Contents
