Miscellaneous functions
Step by step
72
Relay
The relay on the HiPath 1120 music module is used to
control all peripheral equipment, such as the door open-
er, etc.
qmd
Enter the code to enable the relay. (*90)
or
rmd
Enter the code to deactivate the relay. (#90)
w
Wait for a confirmation tone.
If a Fax/DID feature was configured...
The relay can be controlled by a remote MF telephone
Required: The remote telephone must have a conver-
sation in progress with the system's programming ex-
tension.
qmd
Enter the code to enable the relay. (*90)
or
rmd
Enter the code to deactivate the relay. (#90)
p
Enter the system password at the remote telephone
(the default is: 31994).
w
Wait for a confirmation tone.
t
Replace the handset.
[1] Activate (contacts closed) or Disable (contacts open) the relay im-
mediately or after a specified time (see Relay and Sensors in Pro-
gramming manual, HiPath 1120).
1