Solid-State Drive - HP Pavilion 14 Maintenance And Service Manual
Hide thumbs
Also See for Pavilion 14:
- Maintenance and service manual (142 pages) ,
- Technical white paper (8 pages) ,
- Maintenance and service manual (99 pages)
Table of Contents
Advertisement
3.
If the WLAN antenna is not connected to the terminal on the WLAN module, you must install a protective
sleeve on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table 5-4
Solid-state drive descriptions and part numbers
Description
1 TB, PCIe
512 GB, PCIe
256 GB, PCIe
Solid-state drive thermal pad (for use only in models with UMA graphics memory)
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the solid-state drive:
1.
Remove the thermal pad from the top of the drive (1).
2.
Remove the Phillips M2.0 × 2.5 screw (2) that secures the drive to the computer.
32
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
27).
Spare part number
L85370-005
L85364-005
L85354-005
M52722-001
27).
Hide quick links:
Advertisement
Table of Contents
