Table of Contents
Advertisement
IndraControl PR4 and VR4 Control cabi-
net PC and panel PC
9.3 USB interfaces XUSB1 to XUSB4
The devices are provided with four USB interfaces on the connector panel
(XUSB1/2: SB 3.0, XUSB3/4: USB 2.0).
Fig. 9-5: USB interfaces
The maximum current carrying capacity per USB socket is 500 mA
for the USB2.0 and 900mA for the USB3.0.
9.4 Ethernet interfaces XETH1, XETH2 and XETH3
The control cabinet PC can be connected to an Ethernet network via the
Ethernet interfaces XETH1, XETH2 and XETH3.
9.5 DisplayPort XDP
At the display port (XDP), an operating display DR or a monitor can be
connected to the display port interface. An active converter is required to
connect a DVI or HDMI monitor, as the internal graphics card does not provide
any automatic detection and switching between DVI-HDMI protocol and display
port protocol. No image is shown if a passive adapter is used.
Fig. 9-6: Display port interfaces
9.6 Long distance XCDI+tx
At the long-distance (XCDI+tx), A cable length of up to 100 m can be used to
interconnect remote operating displays to the individual devices.
Fig. 9-7: XCDI+ connection
R911384699_Edition 03 Bosch Rexroth AG
17/57
Interfaces
Advertisement
Table of Contents
