1 Specifications Front Speakers (SB-VKX95GA-K) Speaker unit(s) Woofer 20 cm Cone type Tweeter 6 cm Cone type Impedance 2Ω Dimensions (W x H x D) 250 mm x 429 mm x 226 mm Mass 4.4 kg Subwoofer Speaker (SB-VKW95GA-K) Speaker unit(s)
2 Disassembly and Assembly Instructions Caution Note: • This section describes procedures for checking the operation and replacing the main components. • For reassembly after operation checks or replacement, reverse the respective procedures. • Special reassembly procedures are described only when required. •...
2.1. Subwoofer Speaker (SB-VKW95GAK) 2.1.1. Disassembly of Front Panel Block Step 6 : Lift up himelon. Caution : Replace himelon if they are torn during disas- sembling. Step 1 : Remove 4 screws. Step 2 : Insert flathead screwdriver into the grooves. Step 3 : Apply light force to push open Front Panel Block as arrow shown.
Page 5
2.1.2. Disassembly of Woofer Speaker 2.1.3. Disassembly Lighting Wire (SP61) P.C.B. Assembly • Refer to “Disassembly of Front Panel Block” • Refer to “Disassembly of Front Panel Block” Step 1 : Remove 8 screws. Step 1 : Remove 2 screws. Step 2 : Remove P.C.B.
4.4. Replacement Parts List 4.4.1. Front Speakers (SB-VKX95GA-K) Safety Ref. No. Part No. Part Name & Qty Remarks Description RGL0784-Q LIGHTING PIECE RGP1704-K FRONT PANEL Safety Ref. No. Part No. Part Name & Qty Remarks XTB3+10GFJ SCREW Description RYQ1441D-K SPEAKER CABINET...