Table of Contents
Advertisement
Shut down, restart, or reboot from the printer control panel
The imagePRESS Server is designed to interact with the printer. Once connected, you do not need to turn the
imagePRESS Server power switch to the off position after you turn off the printer.
1 Make sure the imagePRESS Server is not receiving, processing, or printing any files. If the system has just finished
processing, wait at least five seconds after the system reaches Idle before you proceed.
2 On the printer control panel, press the Main Menu button.
3 If the Fiery logo is not displayed, press Show All.
4 Press the Fiery logo and then press Tools.
5 Press Restart Server.
6 Select one of the following:
•
Reboot Server
Completely restarts the imagePRESS Server, both the imagePRESS Server system software and the operating
system software on the imagePRESS Server.
•
Restart Server
Restarts the imagePRESS Server system software without rebooting the operating system software on the
imagePRESS Server.
•
Shut Down System
Completely shuts down the imagePRESS Server.
Configuration and Setup
Integrating the imagePRESS Server into your network
23
Hide quick links:
Advertisement
Table of Contents
