Download Print this page

Silvercrest 2040 Short Manual & Service Information page 25

Usb hub

Advertisement

Available languages

Available languages

P O W E R S U P P LY
The device consumes electricity in the Standby mode. In order to
completely disconnect the device from the mains, the power adapter
must be pulled out from the wall outlet. For this reason, the device
should be positioned in a way that assures a direct and unobstructed
access to the wall outlet so that the plug-type power adapter can be
immediately pulled out in an emergency situation. To avoid the danger
of fire if the power adapter is not going to be used for a long while
(e.g. during holidays) it should always be disconnected from the power
socket. Before stormy weather when there is the danger of lightning,
disconnect the device from the power supply.
Use only the power supply unit provided "5V/1A TARGA:
KSUFB0500100W1EU" in order to prevent the risk of overheating,
housing deformation, fire, electric shocks, explosions and other dangers.
Never connect the power supply unit to other devices.
Complete power consumption of all connected devices must not exceed
1.0 A (4 ports max. 0,25A/USB port, 2 ports: max. 0,5A/ USB Ports).
C A B L E S
Never hold the power cord with wet hands as this may cause a short
circuit or electric shock.
Never place the device, heavy objects or furniture on the cable and take
care that the cord does not become trapped, especially at the plug and
sockets. Never make knots in the cable and do not tie it together with
other cords. All cables should be positioned so that nobody can trip over
them or be obstructed by them.
24

Advertisement

loading