Table of Contents
Advertisement
4 Management with the Web Interface
The switch provides Web pages that allow switch management through the
Internet. The program is designed to work best with Microsoft Internet Explorer
5.5, or later versions. NOTE: Netscape is not supported.
4.1 Log into Web user interface
1. From a PC, open your web browser, type the following in the web address (or
location) box, and press <Enter>:
This is the factory default IP address for the switch. A login screen displays,
as shown in Figure 8
Figure 8. Configuration manager login screen
Login is not required if you do not enable Web authentication
access (see 3.3.2)"
2. Enter your user name and password, then click OK.
Use the following defaults the first time you log into the program. You can
change the password at any time through CLI interface (see section 5.3.1)
Default User Name: admin
Default Password:<no password>
GigaX2008EX L2 Managed Switch User Manual
http://192.168.1.1
®
11
Advertisement
Table of Contents
Troubleshooting
