Table of Contents
Advertisement
PAN9520 Wi-Fi Module
Name
mpwr_cbw20_chan9
mpwr_cbw20_chan10
mpwr_cbw20_chan11
mpwr_cbw20_chan12
mpwr_cbw20_chan13
mpwr_cbw20_chan14
mpwr_cbw40_chan3_4
mpwr_cbw40_chan5_6
mpwr_cbw40_chan7_8
mpwr_cbw40_chan9_10 87 (0x57)
mpwr_cbw40_chan11
Editing Binary Files
It is recommended to use the binary files provided by Panasonic. The files can be edited as long
as they do not exceed the limits given at the beginning in
ESP32-S2 AT
Firmware. Therefore, it is recommended to use an editor that can represent the
binary data as hexadecimal values (e.g. "HxD").
Enabling the Usage of a "Phy Init Data" Binary
Per default the PAN9520 will use the "phy init data" defined by the source code. If a binary file
shall be used, a setting must be applied in the project configuration before the project is
compiled.
1. Enter the command idf.py menuconfig in the ESP-IDF command line tool to open
the menu.
Module Integration Guide Rev. 1.1
Byte
Notes
Position
in Binary
78 (0x4E)
Bit[3:0]: 11g/n
Bit[7:4]: 11b
79 (0x4F)
Bit[3:0]: 11g/n
Bit[7:4]: 11b
80 (0x50)
Bit[3:0]: 11g/n
Bit[7:4]: 11b
81 (0x51)
Bit[3:0]: 11g/n
Bit[7:4]: 11b
82 (0x52)
Bit[3:0]: 11g/n
Bit[7:4]: 11b
83 (0x53)
Bit[3:0]: 11g/n
Bit[7:4]: 11b
84 (0x54)
Bit[3:0]: ch 3
Bit[7:4]: ch 4
85 (0x55)
Bit[3:0]: ch 5
Bit[7:4]: ch 6
86 (0x56)
Bit[3:0]: ch 7
Bit[7:4]: ch 8
Bit[3:0]: ch 9
Bit[7:4]: ch 10
88 (0x58)
Bit[3:0]: ch 11
Bit[7:4]: N/A
6 Regulatory and Certification Information
TX Power Limit
Resulting Power
Index
RED
FCC/IC
N/A
0x01
11g/n: 13 dBm
N/A
0x04
11b: 18 dBm
N/A
0x04
11g/n: 7 dBm
N/A
0xAA
11b: 7 dBm
N/A
0xAA
N/A
0xAA
N/A
0x66
Ch 3: 11 dBm
Ch 4: 11 dBm
N/A
0x66
Ch5: 11 dBm
Ch6: 11 dBm
N/A
0x66
Ch7: 11 dBm
Ch8: 11 dBm
N/A
0xA6
Ch9: 16 dBm
Ch10: 7 dBm
N/A
0xAA
Ch11: 7 dBm
6.1.2 Country Code Setting with
Page 27 of 44
Advertisement
Table of Contents
