Table of Contents
Advertisement
f
NOTE: Turn ON joystick steering system switch (b) after
turning key switch (2) to ON position. Otherwise, the
machine cannot move forward/reverse.
The F/R selector switch indicator (c) turns ON.
IMPORTANT: Never operate the starter for more than
15 seconds at a time. If the engine fails to start,
return key switch to OFF. Wait for more than 60
seconds, then try again.
Failure to do so may damage the starter or discharge
the batteries.
5. Turn key switch (2) to START position to rotate the
starter. The engine will start. Do not step on accelerator
pedal (9).
6. As soon as the engine starts, release the key switch.
The key switch will automatically return to the ON
position. Run the engine at low idle without applying
accelerator pedal (9).
IMPORTANT: At starting the engine, the engine RPM
(min
) is kept at low idle for maximum 35 seconds
-1
when the coolant or hydraulic oil temperature is
low, or for 3 seconds if these temperatures are in the
acceptable operation range.
After this period, the engine RPM will increase by
applying accelerator pedal (9).
d
WARNING: Do not operate the machine while the
engine RPM is being kept at low idle, otherwise, the
machine or the front attachment could unexpectedly
move that may result in serious injury.
7. Perform checks to be done after starting the engine
and warm up by referring to page 3-9.
f
NOTE:
If the machine is equipped with the secondary steering,
the secondary steering auto-check sound may be heard
after starting the engine.
White smoke may occur for several minutes after the
engine starts, this is not a malfunction.
After key-switch OFF, wait more than 60 seconds for the
function recovery of the starter, and the communication
processing of the engine controller.
Then starting the engine again.
OPERATING THE ENGINE
3-7
b
c
2
9
K-Lever5
95Z7B-3-7-1
M4GB-01-089
2
MNEC-01-036
Advertisement
Table of Contents
Troubleshooting
