3-9-3-1 Verify the Network Connection to a Device
NOTE:
Vivid T8/Vivid T8 Pro – Basic Service Manual
5718826-100 English Rev. 10
Follow the steps below to do a First Test (TCP-IP Ping) of the
connection:
1. Highlight the device to be verified and select Properties.
Figure 3-38. DICOM Server Properties dialog
2. Select the "Smily" button to Ping the server.
By selecting the "Smily" button, a ping is sent to the remote
server to see if it is accessible via the network. It is not a
DICOM Echo (DICOM ping), so it does not check AE title or
port number.
Figure 3-39. Ping Check
3. If the network connection to the server is OK, it will be
illustrated by a smiling face
A sad smily indicates that the network connection is failing.
Typical causes:
•
Network cable not connected
•
Configuration erroe(s)
Connectivity setup
.
3-51