LTE CPE B2368
User Guide
Label
Status
Host Name
MAC Address
IP Address
Reserve
Apply
Cancel
Refresh
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 6-4 Static DHCP: Add
The following table describes the Labels in this screen.
Table 6-3 Static DHCP: Add
Label
MAC
Address
IP Address
Issue 03 (2019-01-31)
Description
This field displays whether the client is connected to the LTE Device.
This field displays the client host name.
The MAC (Media Access Control) or Ethernet address on a LAN
(Local Area Network) is unique to your computer (six pairs of
hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
This field displays the IP address relative to the # field listed above.
Select the check box in the heading row to automatically select all
check boxes or select the check boxes in each entry to have the LTE
Device always assign the selected entries' IP addresses to the
corresponding MAC addresses (and host names). You can select up to
128 entries in this table.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Click Refresh to reload the DHCP table.
Description
Enter the MAC address of a computer on your LAN.
Enter the IP address that you want to assign to the computer on your LAN
with the MAC address that you will also specify.
Copyright © Huawei Technologies Co., Ltd.
6 Home Networking
62