Connect S2 | Solar Frame | User Guide
Mounting with magnets
No tools are required.
Attach the gateway to a metal surface. Use the two neodymium magnets supplied to attach the gateway.
Screw the magnets hand-tight completely into the housing
•
Carefully attach the device to a metal object with magnets
•
Check the device for secure fixing
•
CAUTION
For safety reasons, attachment with magnets is only permitted up to a maximum height of
2 meters.
Select an alternative mounting method for higher mounting positions.
WARNING
When mounting on vehicles, mobile machines or other moving objects, high accelerations can
affect the device. In these cases, mounting the device with the mounting magnets is not
permitted.
DO NOT attach the gateway to the outside of moving objects such as trucks, trailers, cars or
TIP
When handling the mounting magnets, please also observe the corresponding safety instructions, see
chapter
© Robert Bosch Manufacturing Solutions GmbH
Observe the maximum height of 2 m.
other vehicles using the magnets.
Safety notes
page 34.
at
16 | 39
Bosch Connected Industry