Sony PlayStation TV Safety Manual page 6
Hide thumbs
Also See for PlayStation TV:
- Quick reference (88 pages) ,
- Safety manual (25 pages) ,
- Instruction manual (24 pages)
Advertisement
ˎ Before plugging in a cable, check that the system
connectors (such as the HDMI output port) and the AC
adaptor or HDMI cable connectors are clean. If not, wipe the
connectors with a soft, dry cloth.
ˎ When the system will not be used for an extended period of
time, or when cleaning the system, unplug the power cord
and any other cables.
ˎ Do not damage the AC adaptor or AC power cord:
– Do not modify the AC adaptor or AC power cord.
– Do not wrap the AC power cord or HDMI cable around the
PS TV system or around the AC adaptor.
– Do not place the AC adaptor or AC power cord near a heat
source or allow them to get hot.
– Do not subject the AC power cord to tension.
– When disconnecting the AC power cord, hold it by the
plug and pull straight out from the electrical socket. Never
pull by the cord and do not pull at an angle.
– Protect the AC power cord from being walked on or
pinched particularly at plugs, electrical socket and the
point where they exit from the system.
– Do not use the PS TV system or the AC adaptor when they
are covered by a cloth or in their cases. Heat may build up
and cause a fire or damage to the system.
ˎ Do not connect the AC power cord to a voltage transformer
or inverter. Connecting the AC power cord to an inverter for
use in an automobile may cause heat to build up in the AC
adaptor and may cause burns or a malfunction.
ˎ Use an electricity supply that is easily accessible, so the AC
power cord can be unplugged quickly if the need arises.
ˎ The socket-outlet shall be installed near the equipment and
shall be easily accessible.
6
Never disassemble the system or accessories
Use the PS TV system and accessories according to the
instructions in this manual. No authorisation for the analysis or
modification of the system, or the analysis and use of its
circuit configurations, is provided. Disassembling will void the
system warranty. Additionally, there is a risk of fire, electrical
shock or malfunction.
Network
ˎ A broadband Internet connection is required to connect to a
network.
ˎ You are responsible for Internet service fees. For details,
refer to the information provided in your service contract or
contact your Internet service provider.
ˎ Use only an Ethernet cable compatible with 10BASE-T or
100BASE-TX networks. Do not use a cord for a standard
residential telephone line or cables of types other than
those mentioned here. Using the wrong type of cord or
cable can cause more electrical current than necessary to
flow through the LAN connector, which may lead to heat
build-up, fire or malfunction.
Using Wi-Fi access points
ˎ The 2.4 GHz bandwidth of radio waves used by the wireless
networking feature of this product is a bandwidth shared by
various devices. This product has been designed to
minimise the effect of other devices using the same range.
However, in some cases interference from other devices
may reduce the connection speed, shorten the signal range
or cause the connection to be terminated unexpectedly.
Advertisement
