1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Diagnostic Equipment
  5. SAIC GRADE-X
  6. User manual

Bosch SAIC GRADE-X User Manual

Automotive diagnostic system
Hide thumbs
Table of Contents

Advertisement

Quick Links

SAIC GRADE-X
SAIC GRADE-X
Automotive Diagnostic System
USER MANUAL
Version 2.3
Copyright ©2016 by Bosch Automotive Service Solutions

Advertisement

Table of Contents
loading

Related Manuals for Bosch SAIC GRADE-X

Summary of Contents for Bosch SAIC GRADE-X

  • Page 1 SAIC GRADE-X SAIC GRADE-X Automotive Diagnostic System USER MANUAL Version 2.3 Copyright ©2016 by Bosch Automotive Service Solutions...
  • Page 2 BOSCH or its affiliates. In countries where any of the BOSCH trademarks, service marks, domain names, logos and company names is not registered, BOSCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names.
  • Page 3 Must be performed according to the above conditions.  Using SAIC GRADE-X tester, away from heat and moving parts to avoid interference. When energized electrical components, never disconnect the circuit to prevent the self-inductance, mutual inductance computer and automotive sensors.

  • Page 4: Table Of Contents

    SAIC GRADE-X CONTENT 0 SAIC GRADE-X OS Requirement ....................4 0.1 GRADE-X not support WinXP any more ................4 0.2 GRADE-X supported OS ...................... 4 0.3 How to get OS Version(Take WinXP as an example) ............4 1. Software Installation ....................... 5 2.
  • Page 5 SAIC GRADE-X 6.9 Reflash【 】 ....................... 63 6.10 Test Report【 】 ....................70...

  • Page 6: Saic Grade-X Os Requirement

    WinXP to support this 0.2 GRADE-X supported OS Currently SAIC GRADE-X can run on Win7 and Win8. Win10 will be supported by the end of this year. But the OS supported may change because of Microsoft’s strategy. 0.3 How to get OS Version(Take WinXP as an example) Step 1: Right click “My Computer”...

  • Page 7: Software Installation

    0） Get the latest installation package from the following site. https://obd.maxuscloud.com/download/ 1） 2） Double click downloaded SAIC GRADE-X package in the previous step and click 【Next】. Shown as below： 3） In SAIC GRADE-X installation page, please read license agreement carefully, and you need to click【I accept the agreement】...
  • Page 8 C:\Program Files X86\Bosch\SAIC GRADE-X. And then click【Next】 to continue. Shown as below： 5） In the SAIC GRADE-X data path page, click Browse to choose the path to install the data. Or else the data will be installed into the default path. For Win7 the default path is C:\Program Data\Bosch\SAIC GRADE-X.
  • Page 9 SAIC GRADE-X 6） Choose where to put this in the start menu. You can change the menu name manually. Or else the default value “SAIC GRADE-X”will be used. And then click【Next】to continue. Shown as below： 7） Select the additional tasks and click 【Next】 to continue, shown as below: Install 8）...

  • Page 10: Software Registration

    （2）Start SAIC GRADE-X it will pop-up computer hardware information (this page for the user run SAIC GRADE-X the first time. Users don’t need to register SAIC GRADE_X again after registered successfully in the future). Shown as below. （3）Please send computer hardware information (red info box above，copy this identification) to Maxus administrator by mail or phone.
  • Page 11 30 days. Or else you have to register your computer again following step (1) to (5). NOTE: When you want to change your computer. After you install SAIC GRADE-X on the new computer the new hardware information will display on the machine. Please send it to Maxus administrator to activate it.

  • Page 12: Software Upgrade

    SAIC GRADE-X 3. Software Upgrade Note: Software update notice can only be available after SAIC GRADE-X is registered successfully. 1）When your computer is connected to internet, if your computer is not installed the latest version of the software, you will automatically receive software updates notice, as shown below: 【...
  • Page 13 SAIC GRADE-X 4）Updating，as shown below： 5) If SAIC GRADE-X is running on your computer，you will be asked to close the software and then update, as shown below： 6）When update is complete, click 【Finish】to exit，as shown below： 7）Start SAIC GRADE-X Diagnostic and check whether the version of the software has...
  • Page 14 （2） start wyUpdate.exe update software，as shown below： （3） SAIC GRADE-X Update information, you will get the upgraded content from this page. And then click【update】to get the latest software，as shown below：...

  • Page 15: Vci Connector

    SAIC GRADE-X VCI connector ① Confirm whether the diagnosis seat and shape is good. ② Open the PC wireless. ③ Select the appropriate connector according to the shape of the vehicle and the diagnostic socket. ④ Master test cord to connect the host and tighten.

  • Page 16: Ui Description

    SAIC GRADE-X 5. UI Description 5.1 Startup interface When start SAIC GRADE-X diagnostics software the first page is as below; and also the process bar is added. 5.2 System Settings 5.2.1 【 】VCI settings 1）User select the appropriate VCI host connection. For SAIC GRADE-X please select...

  • Page 17: Settings

    SAIC GRADE-X 2）If the VCI button is grey，please install VCI Manager or CVDS，as shown below； 5.2.2 【 】Settings 1）Click the Settings button, the user can change the language【 】and unit【 】 and Appearance Setting【 】as shown below: 2）Click on the language settings, select the language you want, click 【Save Settings】...

  • Page 18: Print Content

    SAIC GRADE-X to save the setting, as shown below; 3）Click quantity and unit settings【 】 ，Select the unit you want, click【Save Settings】 to finish. 5.2.3 【 】Print Content Click to print, you can copy the screen【 】 ，print screen【 】 ，print content...

  • Page 19: About

    SAIC GRADE-X 【 】 ，as show below：  Copy screen【 】 ：You can copy the whole screen to the Clipboard  Print screen【 】 ：The screen can be Print directly.  Print content【 】 ：print data 5.2.4【 】About Click【 】about, you could see version 【...

  • Page 20: Exit

    】Exit You can click 【 】exit the system，you can click 【 】back to main page/exit SAIC GRADE-X【 】 ，as shown below： 6. Test Steps NOTE: The test process is based on EG10 as an example. Please refer to this for...

  • Page 21: Vehicle Selection

    SAIC GRADE-X 6.1 Vehicle Selection You can choose the vehicle image to test, as shown below; 6.2 Choose ECUs manually or check ECUs automatically You can select to choose ECUs manually or check ECUs automatically. Please choose 【Choose ECU manually】or【Check existing ECUs automatically】 ，as shown below：...
  • Page 22 SAIC GRADE-X 2）The ECUs selection page will list all the ECUs for the current vehicle. You can choose the ECUs you want to diagnostic or【Select All】 to diagnostic all ECUs, and then please click【OK】to enter diagnose interface, as shown below：...
  • Page 23 SAIC GRADE-X Automatically checks the connected ECU 6.2.2 1）Choose 【Check existing ECUs automatically】to check the existing ECUs automatically，as shown below: 2）The system will go into the main diagnostic page directly after finishing checking existing ECUs，as shown below：...

  • Page 24: Vehicle Information

    SAIC GRADE-X 6.3 Vehicle Information【 】 6.3.1 Vehicle Information Enter vehicle information page，click【Vehicle Information】 ，you cloud see two tabs: vehicle Information and ECU Information，as shown below：  Selected product：You can see the vehicle model, vehicle type, VIN  Vehicle Information：You can see the year if existing.

  • Page 25: Ecu Information

    SAIC GRADE-X 6.3.2 ECU Information Click【ECU Information】 ，can get all the version information，as shown below： 1）Click ECU to view software and hardware version，as shown below： 2）Click【 】to choose【Refresh】the system will talk to the current ECU again to re-read the information，as shown below：...
  • Page 26 SAIC GRADE-X 3）Click【Refresh All】 to refresh all ECUs information，as shown below：...
  • Page 27 SAIC GRADE-X...

  • Page 28: Dtc

    SAIC GRADE-X 6.4 DTC【 】 1）Click【DTC】 to view DTC of ECU，as shown below：  【 】 ECU has DTC.  【 】read DTC failed or ECU not exists.  【 】 no DTC.  【 】 Number of DTC.
  • Page 29 SAIC GRADE-X 2）Click ECU to view DTC，as shown below：  【Status】 ：DTC status  【 】 ：has freeze frame data or not  【 】 ：to show freeze frame data 3）Choose DTC Status display mode ① Click 【 】to choose DTC Status display mode, as shown below：...
  • Page 30 SAIC GRADE-X ③ DTC status icon and text ,as shown below：  【 】 Current DTC, Lamp on  【 】 History DTC, Lamp on  【 】 Current DTC, Lamp off  【 】 History DTC, Lamp off ...
  • Page 31 SAIC GRADE-X 4）Freeze Frame Data ① Click left side【 】 to show freeze frame data，as shown below： ② Click【Freeze Frame Data】 ，as shown below： ③ Click【Close】to exit, as shown below：...
  • Page 32 SAIC GRADE-X 5）Re-read DTC ① Re-read DTC for all ECUs Click【Refresh All】 ，The system will talk to all ECUs to get fault code for all ECUs, as shown below： ② Re-read DTC for one ECU  Click【 】 of the ECU，and then enter sub menu，as shown below: ...
  • Page 33 SAIC GRADE-X 6）Clear DTC ① Clear DTC for all ECUs Click【Clear All】 ，diagnostic software will talk to all ECUs to clear DTC，as shown below： ② Clear All DTC and Re-read Click【Clear+Refresh All】 ，ECU diagnostic software will talk to all ECUs to clear all fault codes and re-read，as shown below：...
  • Page 34 SAIC GRADE-X  Click【Clear】 ，to clear DTC of the current ECU, as shown below: ④ Clear DTC and re-read for one ECU  Click【 】 ，as shown below:  Click【Clear+Refresh】 ，to clear DTC and re-read of the ECU, as shown below:...
  • Page 35 SAIC GRADE-X...

  • Page 36: Data List

    SAIC GRADE-X 6.5 Data List【 】 1）Click【Data List】 to show all signals of selected ECU，as shown below： 2）Choose Data List NOTE: You can choose to monitor more than one signals for more than one Ecus. ① Click data list，as shown below：...
  • Page 37 SAIC GRADE-X 3）Monitor signals ① Select items and click【Start monitoring】to show signal list, as shown below： ② Waveform data flow diagram Support 8 signals in waveform diagram at the same time，as shown below：...
  • Page 38 SAIC GRADE-X 4）Freeze View  Click【Freeze View】to freeze current signals，as shown below：  Click【Unfreeze View】 to unfreeze current signals，as shown below：...
  • Page 39 SAIC GRADE-X 5） Recording signals  Click【Start recording】 ，as shown below：  Input description and click【Start】 to start recording the data, as shown below：...
  • Page 40 SAIC GRADE-X  Click【Stop recording】 to stop recording，as shown below： 6） Playback ① Click【Monitoring Playback】 to playback the recorded signals，as shown below：...
  • Page 41 SAIC GRADE-X ② Choose the record data to playback，as shown below： ③ Click timeline to show the value，as shown below：...
  • Page 42 SAIC GRADE-X ④ Click【 】 ，choose【Close】to exit，as shown below：...
  • Page 43 SAIC GRADE-X 7） Exit Click【 】 ，choose【Close】to exit，as shown below：...
  • Page 44 SAIC GRADE-X...
  • Page 45 SAIC GRADE-X 8) Recording data (1) Data path When you have finished recording the data stream and exit the SAIC GRADE-X diagnostic software, you can find record file under the folder C:\temp ，as shown below： (2) Submit data stream recording file When you want to provide the file to SAIC, you need to submit the following two files：...
  • Page 46 SAIC GRADE-X ○ The same VIN folder in C:\temp\GRADE-X_storage，as shown below： Note: the file names of the above two files must be the same. 9) Signal group (1) Create your own signal group You can choose more than one items for more than one ECUs and then click...
  • Page 47 SAIC GRADE-X ① Input group name,click【OK】 ，as shown below： (2) View your own signal groups ① Click【Signal group selection】to view your own signal groups，as shown below:...
  • Page 48 SAIC GRADE-X ② Select the items you wants to monitor or click 【 Select all 】 to monitor all signals in the current group, as shown below： ③ Click 【Start monitoring】 ，as shown below：...
  • Page 49 SAIC GRADE-X (3) Delete group ① Click 【 】 ，as shown below： ② Click【Remove】to delete the current group，as shown below：...
  • Page 50 SAIC GRADE-X 10）Read signals for SV61-EV80 SRS（Supplemental Restraint） crash recorder data section (1) Click【SV61-EV80】→【SRS(Supplemental Restraint)】→【Data List】 → 【Signal group selection】 ，as shown below： (2) Click crash recorder data section 1，Click to select the data steam or click on the【Select all】data flow，as shown below：...
  • Page 51 SAIC GRADE-X (3) Click【Start monitoring】 ，as shown below： (4) Show crash recorder data，as shown below；...
  • Page 52 SAIC GRADE-X...

  • Page 53: Actuator Test

    SAIC GRADE-X 6.6 Actuator Test【 】 1）Click【Actuator Test】 to show all available tests，as shown below： 2）Example：Click “Roof Lamp Read”，as shown below： 3）Read conditions and steps and set the value, click 【Yes】 to perform the test，as shown below：...
  • Page 54 SAIC GRADE-X 4）View result，click【OK】 to finish，as shown below： Note: If the test is executed successful, the system will return to the first page and you can test again; if the test fails, the system will exit the current page. 5）Test feedback...
  • Page 55 SAIC GRADE-X  【 】 ：Successful  【 】 ：Not perform  【 】 ：Interrupt or failed...

  • Page 56: Configuration

    SAIC GRADE-X 6.7 Configuration【 】 NOTE: ECU configuration function is to modify state, write VIN, maximum number of keys, write installation date configuration. Improper operation will cause unexcepted result. So please follow the safety directions. This function requires secure access.
  • Page 57 SAIC GRADE-X  【Title】 ：Item Name  【Current Value】 ：Current value from ECU for the current item  【Unit】 ：Unit for the current item  【Configurable Value】 ：Allowed values for the current item 4）Finished， execute result，click【OK】 to exit, as shown below：...
  • Page 58 SAIC GRADE-X 6）Please kindly read conditions and steps. The default value is read out from ECU. And you can change the data using the keyboard, and Click【Yes】to perform，as shown below： 7）Finish and view result，click【OK】to exit，as shown below：...
  • Page 59 SAIC GRADE-X 8）Test Feedback The system will show the test result，as shown below：  【 】 ：Success  【 】 ：Not perform  【 】 ：Interrupt or failed...

  • Page 60: Special Function

    SAIC GRADE-X 6.8 Special Function【 】 Note: The special function is a complicated configuration process among different ECUs, especially for IMMO, Check and calibration. The following case is “Add PEPs fob”. 1） Click【Special Function】to show available items，as shown below： 2） Click【IMMO】→【PEPS(Passive Entry Passive Start)】→【Add Fob】 ，as shown...
  • Page 61 SAIC GRADE-X 3） Please kindly read instruction before start and click【Yes】to continue，and 【No】to exit，as shown below： 4） Enter correct PIN and click【Yes】to continue，or【Cancel】to exit，as shown below： 5） PEPS status checking，click【OK】to continue，as shown below：...
  • Page 62 SAIC GRADE-X 6） Follow the instruction to put key and click【OK】to continue，as shown below： 7） Show result and check status，click【OK】to exit，as shown below：...
  • Page 63 SAIC GRADE-X 8）Test Feedback The system will show the test result，as shown below：  【 】 ：Success  【 】 ：Not perform  【 】 ：Interrupt or failed...
  • Page 64 SAIC GRADE-X 9）Not match condition When one of the condition is not satisfied the system will show the causes and suggest another operation，as shown below：...
  • Page 65 SAIC GRADE-X 6.9 Reflash【 】 ECU flashing is to rewrite the data into the ECUs. NOTE: The following ECU flashing process is based on VMS(Vehicle Management Controller) Flashing. 1) Click【Reflash】to show available flash for ECUs，as shown below：...
  • Page 66 SAIC GRADE-X 2) Click【VMS(Vehicle Management Controller)】 ，as shown below： 3) Click to choose one flash file. Currently there are three flash files can be selected to flash into VMS，as shown below：...
  • Page 67 SAIC GRADE-X 4) Please read instruction and make sure all the conditions are satisfied, click【OK】 to continue，as shown below： 5) Start flashing, please wait，as shown below：...
  • Page 68 SAIC GRADE-X 6) Input ECU Part Number after flash complete if needed, the default value is current value from ECU, you could re-enter new value，click【OK】to next step，as shown below： 7) Input Tester Reference Number, the default value is current value from ECU, you...
  • Page 69 SAIC GRADE-X 8) Input Odometer，the default value is current value from ECU, you could re-enter new value, click【OK】to next step，as shown below： 9) Flash complete，please check whether ECU works，click【OK】to next step，as shown below：...
  • Page 70 SAIC GRADE-X 10) Back to the flash file choice page ，as shown below:  【 】 ： Successful  【 】 ： Not perform  【 】 ：Interrupt or failed...
  • Page 71 SAIC GRADE-X  【 】 ：Not flash 11) You could select【 】back to main page, as shown below:：...
  • Page 72 SAIC GRADE-X 6.10 Test Report【 】 Test Report will summarize all operations and results which user have operated, you could print it，as shown below：...

Table of Contents