Advertisement
Quick Links
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear
instruction
protective
manual
clothing
1. saFetY
Do not use the cable ejection tools for a task for which they are not designed. The tools are intended for use on 12/24V automotive
8
wiring systems only.
ensure that the vehicle ignition is turned off before releasing connectors.
9
WarninG! Use extreme caution when working near ignition coils, distributor caps, ignition wires and spark plugs. These components
‰
create hazardous voltages when the engine is running.
Remove personal metallic items such as rings, bracelets, necklaces and watches. A battery can produce a short-circuit current which is
9
high enough to weld such items to the vehicle and cause severe burns.
ensure that hands and clothing are clear of fan blades, belts and other moving or hot parts of the engine. Remove ties and contain long
9
hair.
Wear safety eye protection and protective clothing. If working near a battery avoid touching eyes.
9
Wash immediately with soap and water if battery acid contacts skin or clothing.
9
Do not smoke or allow a spark or flame when in the vicinity of a battery or engine.
8
ensure that the cable release tools are in good condition before use. Do not use if damaged.
9
Keep children and unauthorised persons away from the work area.
9
Do not use the cable ejection tools for a task for which they are not designed.
8
WarninG: The warnings, cautions and instructions discussed in this manual cannot cover all possible conditions and situations that may
‰
occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by
the operator.
2.
introDUction
i
Reduce time spent on, and damage to, vehicle electrical systems with these connector tools. Set consists of cable extraction, contact
ejection and contact dismantling tools. Covers a wide range of connectors, including Kabelex. Vehicle coverage: BmW, daimler/Chrysler,
Fiat, Ford, mAn, mazda, Porsche, PSA, Renault, Saab, Seat, Skoda, VAG, Vauxhall/opel. Supplied in a blow moulded storage case.
© Jack Sealey limited
Universal cable ejection tool set 15Pc
vs9201.v2
model no:
Wear
eye
protection
Original Language Version
VS9201.V2 Issue 2 (1) 02/10/19
Advertisement
Related Manuals for Sealey Vs9201.v2
Summary of Contents for Sealey Vs9201.v2
- Page 1 Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 2.8 & 5.8mm opel, VW/Audi Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500 environMent Protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.