Page 2
This product has been manufactured by or on behalf of with the limits for a Class B digital device, pursuant to Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108- part 15 of the FCC Rules. These limits are designed to 0075 Japan. Inquiries related to product compliance...
Page 3
For the customers in the U.S.A. SONY LIMITED WARRANTY - Please visit http:// www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product. For the customers in Canada SONY LIMITED WARRANTY - Please visit http:// www.sonybiz.ca/solutions/Support.do for important...
Table of Contents Precaution ............5 On Safety ..............5 On Installation ............5 Handling the Screen ..........5 On Burn-in .............. 5 On a Long Period of Use ........5 Handling and Maintenance of the Screen .... 5 On Dew Condensation ........... 6 On Repacking ............
brightness may occur. Precaution These problems are not a malfunction. Images that may cause burn-in Masked images with aspect ratios other than 16:9 On Safety Color bars or images that remain static for a long time Character or message displays that indicate settings or ...
The surface of the screen is specially coated. Do not attach adhesive objects, such as stickers, on it. The surface of the screen is specially coated. Do not touch the screen directly. Wipe the screen surface gently with a cleaning cloth or a soft dry cloth to remove dirt.
Menu operation buttons Location and Function of Displays or sets the on-screen menu. MENU button Parts and Controls Press to display the on-screen menu. Press again to clear the menu. Long press (two seconds or more): Displays the menu screen Front Panel/Side Panel Short press: Displays the [Contrast]/[Brightness]...
Pin assignment About the Installation To install the monitor on an arm, etc., select the arm with the mounting hole pattern of 100 × 100 mm (4 × 4 Pin number Functions inches) shown below. + (DC 12 V to 48 V) 4-M4 hole + (DC 12 V to 48 V) Shield...
Using the Binding Band Initial Settings The connected cables can be bound with the supplied When you turn on the unit for the first time after binding band. purchasing it, the initial setting screen is displayed. Pass the binding band through the band base part. Band base part Binding band Press the ...
The item to be changed is displayed in yellow. If the menu consists of multiple pages, press the Using the Menu or button to go to the desired menu page. Make the setting or adjustment on an item. The unit is equipped with an on-screen menu for making various adjustments and settings such as picture When changing the adjustment level:...
Page 11
About the memory of the settings The settings are automatically stored in the monitor memory. About the protection of the setting values You can protect the setting values using [Control Lock]. When the values are protected by the control lock function, you cannot change the values.
Item Setting [User Control] menu [Manual Adjustment] If you set the [Color Temp] to the [User1], [User2], [User3], [User4] or The [User Control] menu is used for adjusting the [User5] setting, the item displayed is picture. changed from black to white, which means you can adjust the color Item Setting...
Item Setting Item Setting [User Preset] [Status]: You can confirm the setting [Dot by Dot Mode] Sets the scan size of the picture. status of the User Presets. [On]: Displays the original video By selecting and confirming signal pixels. If a format other User Preset number or [Default], than 1920 ×...
]: Japanese the screen may become dark and the unit may turn off. In this case, refer to Sony qualified service personnel. An error message is displayed in the lower left corner of the screen Refer to Sony qualified service personnel.
Aspect 16:9 Always verify that the unit is operating properly Pixel efficiency 99.99% before use. SONY WILL NOT BE LIABLE FOR Viewing angle (Panel specification) DAMAGES OF ANY KIND INCLUDING, BUT 89°/89°/89°/89° (typical) NOT LIMITED TO, COMPENSATION OR (up/down/left/right, contrast > 10:1)
Page 18
* Length of M4 screws (rear) Attached object Monitor cabinet M4 screw 10 ( ) to 12 ( Unit: mm (inches) Note When attaching, use the screws of the size shown above. Dimensions...