How to Use the Stand Mixer
How to Use
1
Set the bowl on the
turntable.
2
Set the hand mixer
on the stand.
(See P. EN9)
3
Make sure the switch
is on the "0" position,
then plug in.
4
Turn on the switch to start.
① Adjust the speed by the usage.(See P. EN6 "Mixing Guide")
② While mixing the ingredients,
turn the bowl anti-clockwise manually.
Please do not run the stand mixer
●
continuously for 5 minutes or more.
Do not pull up beaters when they are still turning.
●
The ingredients may splash.
➜
When beaters are turning slow or they stop during operation
• Ensure to turn off the switch, remove the ingredients stuck on beaters.
If the ingredients are exceeded amount, decrease the ingredients a little.
➜
(If keep using as it is, it may cause malfunction on the motor.)
5
Turn the switch on the "0" position, then unplug.
6
Press the release button on the side of the base and tilt or
remove the hand mixer, then remove the bowl.
EN10
( Continued )
3
5
1
2
6