Page 1
Operating Instructions Dishwashers To prevent accidents and machine damage, read these instructions before installation or use. en-US HG07-W M.-Nr. 11 838 280...
Activating the safety lock ..................23 Miele@home ......................24 Basic settings ...................... 25 Setting the language ..................25 Setting up Miele@home ................. 25 Setting the time ....................26 Setting the water hardness ................26 Activating AutoDos..................27 Reactivation salt ....................28 Filling the salt reservoir...................
Page 3
Contents Display......................... 44 Brightness ...................... 44 Color scheme ....................44 Volume......................... 45 Memory ....................... 45 Refill indicators ....................45 AutoOpen ......................46 2nd interim rinse....................46 BrilliantLight......................46 SaniWash Cycle ....................46 System Lock......................47 Deactivating the system lock ................. 47 Software version....................
Page 4
Contents Selecting a program .................... 71 Display of program duration ................72 Starting a program ....................72 End of program....................73 Energy management ................... 73 Turning off the dishwasher .................. 74 Unloading the dishwasher................... 74 Interrupting a program..................75 Canceling or changing a program ............... 75 Options .......................
Page 5
Contents Appliance warranty and product registration ............112 Optional accessories ..................113 Installation......................115 Water intake ......................115 Water drainage ....................117 Electrical connection ................... 119 Sound emission testing ..................121...
IMPORTANT SAFETY INSTRUCTIONS. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe...
Page 7
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. This dishwasher is intended for use at altitudes of up to 13,000 ft (4,000 m) above sea level.
Page 8
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the dishwasher unless they are constantly supervised. Children must not be allowed to clean or maintain the appliance. Children should be supervised in the vicinity of the dishwasher. Never allow children to play with the dishwasher.
Page 9
Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and re- pairs should only be carried out by a Miele authorized technician. Damage to the dishwasher can compromise your safety. Before using the dishwasher and in particular following transport, check it for any visible damage.
Page 10
IMPORTANT SAFETY INSTRUCTIONS Ensure that the connection data on the dishwasher’s data plate (fuse rating, frequency, and voltage) match the electricity supply. This data must correspond in order to avoid the risk of damage to the dishwasher. Compare these before connecting the appliance to the electricity supply.
Page 11
If the power cord is damaged, it must only be replaced with a spe- cific cord of the same type (available from Miele Customer Service). For safety reasons, this must only be done by Miele Customer Ser- vice or a service technician authorized by Miele.
Page 12
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact the Miele Customer Service. The maximum weight of the front panel that can be aligned with the factory-installed door springs is 22-26.5 lb (10–12 kg) depending on model.
Page 13
IMPORTANT SAFETY INSTRUCTIONS Dishwasher detergents can cause burning on the skin and in the eyes, nose, mouth, and throat. Avoid contact with detergents. Do not inhale powder detergents. Do not swallow dishwasher detergents. Seek medical attention immediately if detergent has been swallowed or inhaled.
Page 14
Accessories and parts Only use original Miele accessories. If other parts are used, war- ranty, performance, and, if applicable, product liability claims will be invalidated. ...
Page 15
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old dishwasher Remove the door of the dishwasher so that children cannot be- come trapped inside. FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Oper- ation and is subject to the following conditions: These devices may not cause harmful interference.
Guide to the appliance Appliance overview a Door locking pins h Filter combination b Top spray arm i Salt reservoir c 3D MultiFlex Cutlery Tray (depending j Data plate on model) k Rinse aid reservoir d Upper basket (depending on model) l Detergent compartment e Middle spray arm m AutoDos detergent outlet...
“Guide to the appli- ance”. b Optical interface e Back sensor button For Miele Customer Service. For navigating back to the previous c Remote sensor button menu or deleting values which have For activating/deactivating the Re- been set previously.
Guide to the appliance The sensor button on the control field Display functions and in the display react to fingertip con- The display is used to select or set the tact. following: The touch display can be scratched - the program by pointed or sharp objects, e.g., - any Options pens.
Page 19
Guide to the appliance Examples of how to operate the ap- You can change the order of programs pliance listed in the Programs menu by pressing and holding a program name and drag- Main menu ging it to the place you want. Use the Back sensor button to switch After selecting a program, the Options from the Programs menu to the main...
Page 20
1:13 IntenseZone Timer To open the roll-down menu, touch the All Miele household appliances that are orange bar at the top edge of the connected to your WiFi network and screen and swipe down with your fin- that have SuperVision display activated ger.
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
Before using for the first time At the end of the program, if the Au- Every dishwasher is tested at the fac- toOpen function is on, the door locking tory. There will be residual water in the pins automatically retract. machine from this test.
Before using for the first time Closing the door Activating the safety lock Insert the baskets. Use the safety lock to prevent children opening the dishwasher door. The door Raise the door upwards until the can then only be opened by using a lot catch engages.
- A WiFi network fore, the availability of featured func- tions cannot be guaranteed. - The Miele app - A Miele user account. The user ac- Miele@home availability count can be created via the Miele The ability to use the Miele app de- pends on the availability of the Miele@home service in your country.
Set up Miele@home? will Turning on the dishwasher appear on the display. Turn the dishwasher on using the If you want to set up Miele@home sensor button. now, select the option. Continue The welcome screen will appear when...
Before using for the first time Setting the time Setting the water hardness The display changes to the screen for The time is updated automatically if a setting the water hardness. connection is established with the WiFi network. - The dishwasher must be pro- grammed to the correct water hard- The display will then change to the ness for your area.
Before using for the first time Activating AutoDos Finally, prompts will appear in the dis- play. The display changes to the settings screen for AutoDos (see “Automatic dis- After confirming these prompts with pensing/AutoDos” under “Detergent”). OK, the messages Refill salt and start the “QuickIntenseWash”...
Before using for the first time Reactivation salt If the water in your area is very soft and constantly lower than 5 gpg In order to achieve good cleaning re- (5 °dH – German scale), you do not sults, the dishwasher needs to operate need to add reactivation salt.
Before using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 1/2 gallon (2 l) of water to enable the salt to dissolve. Once the dishwasher has been used once, there is always sufficient water in the salt reservoir.
Before using for the first time Refilling the salt After the salt reservoir has been filled, the refill indicator may still appear in the Fill the salt reservoir with reactivation display if the salt concentration has not salt when Refill salt and start the yet reached the correct level.
Before using for the first time Rinse aid If you only ever wish to use combina- tion detergent products in your dish- Rinse aid is necessary to ensure that washer, you do not need to add rinse water does not cling and leave marks aid.
Before using for the first time Close the lid firmly until you hear it Adding rinse aid click into place. Otherwise, water can enter the rinse aid reservoir during a program. Wipe up any spilled rinse aid. This prevents excess foam developing during the next program.
Settings Changing settings You can alter the dishwasher’s con- trols to suit changing requirements by Select the setting you want to adjusting the settings. change. The settings can be altered at any The selected setting is marked in or- time.
Settings Language Time The display can be set to appear in one The current time of day must be set be- of several different languages. fore you can use the timer option. You can change the language used in Setting the clock format the display and also the country via the You can select either a 24-hour or 12- Language ...
Settings Water hardness °d gr/gal °fH Display Your dishwasher is fitted with a water softener. - The dishwasher must be pro- grammed to the correct water hard- ness for your area. - Your local water authority will be able to advise you of the water hardness level in your area.
Settings Setting the water hardness AutoDos (AutoDos) Select the water hardness level in AutoDos automatically adjusts the your area and confirm with OK. amount of detergent to the selected program. In the Auto program, the quantity is adjusted depending on the degree of soiling of the dishware.
The “Settings” and “Miele@home set- If spots appear on dishes and glass- tings” menus will be added as addi- ware: tional menu options.
Page 38
Settings The Miele app is available to download As an alternative to networking via the free of charge from the Apple App Miele app, you can connect your dish- ® washer to your WiFi network using WPS Store or from the Google Play Store™.
Page 39
OK. Deactivate and confirm with OK. Use the sensor buttons to con- In the Miele@home menu, the menu op- secutively call up the WiFi signal tion Activate will now be displayed in- strength, the name of your router, and stead of the associated IP address.
Page 40
Settings Set up again Reset network configuration? This menu option only appears if you This menu option only appears if you have already connected your dish- have already connected your dish- washer to your WiFi network. washer to your WiFi network. You can use this menu option to reset Connecting via the app all WiFi module settings to the factory...
Even if the Remote control option is stalled automatically. They must be initi- turned off, you can use Miele to call up ated manually. information about your appliance. How- ever, you cannot start any programs or If you do not install an update, you can change any settings from it.
- Do not turn the dishwasher off during the update. Otherwise, the update will be aborted and will not be in- stalled. - Some software updates can only be carried out by Miele Customer Ser- vice.
Settings Setting the electricity-rate times EcoStart Before you can use the EcoStart option, This option is not available in all areas. you must set at least one electricity-rate time. In order to run your dishwasher in the most economical way, you can use the ...
Settings Changing the electricity-rate times Temperature You can change the start, finish, or pri- You can set whether the temperature ority of an electricity-rate time. should be displayed in °F/Fahrenheit or °C/Celsius. Select an electricity rate time from R1–R3 to change. The factory default setting is °C/Cel- sius.
If you only ever use combination deter- vated. gent products or automatic dispensing using Miele PowerDisks (if available), Audible signals you can turn off the refill reminders for reactivation salt and rinse aid if you The audible signals at the end of a pro- wish.
Settings AutoOpen BrilliantLight In some programs the door automati- This dishwasher is equipped with inte- cally opens slightly to assist the drying rior lighting. process. When the door is open, the lighting turns off automatically after 15 minutes. This function can be deactivated if you wish.
Settings System Lock Software version The system lock prevents your dish- You can display the electronic software washer being used without your knowl- version of your dishwasher for technical edge. support purposes. If an attempt is made to turn the dish- Legal Information washer on when the system lock is acti- You can view legal information about...
The copyright powers of Miele tected by copyright. The copyrights and third parties have to be respected. held by Miele and third parties must be respected. Furthermore, this device/appliance con- tains software components which are...
Factory default You can reset all dishwasher settings to the factory default settings. WiFi module settings (where applicable) have to be reset separately (see “Miele@home” under “Settings”). Select Reset settings? Select the option and confirm with OK.
Caring for the environment - If you are manually dosing the deter- Energy-saving dishwashing gent, reduce the amount of detergent This dishwasher is exceptionally eco- when using powder or liquid nomical in its use of water and electric- detergent if the baskets are only half ity.
Loading the dishwasher - The spray arms must not be blocked General information by items which are too tall or hang Remove coarse food residues from through the baskets. Test for free dishes. movement by manually rotating the spray arms. There is no need to pre-rinse items un- der running water.
Page 52
Loading the dishwasher Wash items not suitable for dish- Damage due to caustic alkaline washers: detergents. - Wooden cutlery and dishes or items Aluminum parts (e.g., the grease fil- with wooden parts. These may dis- ters of ventilation hoods) can be color and fade.
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls, and flat Loading the upper basket dishes on the FlexCare cup rack. Glasses can be arranged along the cup Risk of damage due to water rack so they sit securely during the pro- leakage.
Page 56
Loading the dishwasher Adjusting the FlexCare cup rack Loading the silicone elements of the FlexCare cup rack You can set the height and depth of the cup rack at 2 different levels so that it The silicone elements in the cup rack can accommodate larger cups and so are specially designed to hold tall that taller items can be placed under-...
Page 57
Loading the dishwasher Lowering the spikes On both right-hand rows of spikes, you can lower every other spike to make it easier to arrange larger dishes, like ce- real bowls. Press the yellow lever downwards , and then lower the dark gray spikes .
Loading the dishwasher To raise the upper basket: Adjusting the upper basket Lift the basket until it clicks into In order to gain more space for taller place. items in the lower basket or upper bas- ket, the upper basket can be adjusted To lower the upper basket: on 3 levels with 3/4 "...
Loading the dishwasher Lowering the spikes Lower basket The rows of spikes at the front are used Loading the lower basket for loading plates, soup bowls, platters, Place larger and heavier items such dessert bowls, and saucers. as plates, serving platters, The spikes can be lowered to make saucepans, bowls, etc., in the lower more room for large items, e.g., pots,...
Page 60
Loading the dishwasher Loading the FlexCare glass holder The MultiClips enable you to fasten with MultiClips wash light items such as those made from plastic onto the glass holder. The silicone elements in the glass holder provide a stable and secure hold for delicate stemware.
Page 61
Loading the dishwasher Loading the glassware rail Lowering the bottle holder This rail is designed to hold tall glasses The bottle holder can be used to keep and glasses with stems securely. narrow items such as milk and baby bottles secure during a program. ...
Loading the dishwasher Loading the filters Filters You can wash 2 ventilation hood filters You can also wash Miele Ventilation- in the upper basket and 2 filters in the Hood Filters. lower basket at once. Select the Filters program for optimum If you only want to wash 2 filters, put dishwashing results.
Loading the dishwasher You can push the left insert to the mid- Cutlery tray dle in order to accommodate tall items Load the cutlery into the 3D MultiFlex and long stemmed glasses in the upper Tray. basket (see “Loading the silicone ele- ments of the FlexCare cup rack”...
Detergents There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Damage caused by using unsuit- These detergents allow you to adjust able detergents. the amount dispensed according to Detergents that are not suitable for the amount of wash items and the domestic dishwashers can cause level of soiling.
Detergents Detergent dispensing Risk of chemical burns from de- tergent. There are 2 ways of dispensing the de- Dishwasher detergents can cause tergent. burning on the skin and in the eyes, During automatic dispensing, the Auto- nose, mouth, and throat. Dos function will automatically dispense Avoid contact with detergents.
Insert a PowerDisk (see “Inserting a PowerDisk” under “Automatic dis- PowerDisks are available to order di- pensing/AutoDos”). rectly from Miele’s online store, Miele Customer Service, or from your Miele The AutoDos function will be activated dealer. automatically.
Detergents Inserting a PowerDisk Turn on the dishwasher before you re- place the PowerDisk so that the dish- washer recognizes it. Only replace the PowerDisk when the message PowerDisk empty. Deactivate appears. AutoDos with OK. If the arrows in the PowerDisk holder and in the viewing window are not pointing toward each other, remove the PowerDisk holder (see “Cleaning...
Page 68
Detergents The detergent powder must be dry so that it does not clump together. Do not fill the AutoDos with any type of fluid. In order to ensure that the AutoDos works at its best, check it each time you replace the PowerDisk and clean it if needed (see “Cleaning the Auto- Dos”...
Detergents Adding detergent Manual detergent dispensing Detergent must be manually dispensed if you have deactivated AutoDos in a program's Options menu. Detergent dispensing The detergent compartment holds a maximum of 3 1/2" tablespoons. There are marks in the detergent com- partment to aid with dispensing: 1 1/4, 2 tablespoons (20, 30 ml).
Page 70
Detergents The detergent must not cause the detergent-compartment lid to get stuck. This can prevent the lid from opening during the program. Do not overfill the detergent com- partment. If you wish, deactivate automatic dis- pensing/AutoDos. Ensure that the detergent packaging is properly closed after use.
Back sensor button to return to the Pro- grams menu. If you want to control the dishwasher remotely using the Miele app, you will first need to activate the Remote start option (see “Activate Remote start” un- der “Options”).
Operation Display of program duration Starting a program The estimated duration of the selected The dishwasher can only be started if program appears on the display before the door is closed. the program begins. During the program Touch the Start sensor button. sequence, the time left until the end of If necessary, confirm the previously the program and the current program...
Operation End of program Energy management The audible signal might sound at the To save energy, the dishwasher will turn end of the program. off automatically 10 minutes after the last time a sensor button is pressed or The program has ended when the dis- after the end of a program.
Operation Turning off the dishwasher Unloading the dishwasher The dishwasher can be turned off at Dishes tend to break and chip more any time using the sensor button. easily when they are hot. Allow the dishes to cool until they are comfortable ...
Operation Interrupting a program Canceling or changing a pro- gram A program will be interrupted as soon as the door is opened. If a program is canceled, important Close the door and press the Start program stages may be missed. sensor button.
Use the safety lock to secure minutes to save energy. the dishwasher door. To turn the display back on for a few minutes, press the sensor button. You can also activate a timer via the Miele app.
Page 77
Options Setting “Start at” Setting EcoStart With the Start at function, you set the EcoStart function enables you to exact time at which you want the pro- benefit from cheaper electricity rates at gram to start. night. Before you can use this option, you need to set up to 3 electricity-rate ...
Page 78
Settings the timer. Timer menu will no longer show the EcoStart function but will instead show Deleting the timer SmartStart (see “Miele@home” under Select the Delete option and confirm “Settings”). with If your energy provider offers this ser- The time for the timer is reset to the vice, they will send a signal to your current time of day.
You can start your dishwasher remotely off and back on again in the meantime. using the Miele app. To do this, you first Even if the Remote start option is not need to install the app on your mobile...
Program overview Program When to use Program sequence Pre- Main Interim Final Drying wash wash rinse rinse °F/°C °F/°C Program for regular use to completely 140– 133– Normal wash a full load of normally soiled dishes 158/60 149/56 with the ability to adjust energy and wa- –70...
Page 81
Program overview Consumption Duration Energy Water Cold water Hot water Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C 50°F/10°C 120°F/49°C h:min h:min 1.06 1.20 3.2/12.1 3:04 2:43 1.40 1.55 3.4/13.0 3:29 3:11 0.90 1.05 3.3/12.5 2:45 2:25 1.10 1.15 2.9/11.0 1:13 0:58 1.45 1.55...
Page 82
Energy The water intake temperature must be Saver 115°F (45°C) for light to normally soiled dishes. Filters Wash program for cleaning Miele ventila- 167/75 131– tion hood filters. 158/55 –70 Clean Special cleaning program to remove...
Page 83
Program overview Consumption Duration Energy Water Cold water Hot water Gallons/Liters Cold water Hot water 50°F/10°C 120°F/49°C 50°F/10°C 120°F/49°C h:min h:min 0.70 0.80 2.4/9.0 4:03 3:53 0.05 7.0/26.5 2:47 1.55 1.70 3.3/12.5 3:51 3:35 1.75 2.00 5.0/19.0 2:37 2:07 3, 4 3, 4 3, 4 2:28–3:45...
Options If you want to cancel the selection of Selecting options an option, touch the sensor button for You can use options to adjust the pro- the option again. grams. When you have made all the settings To do this, you can select or deselect you want, press the Start sensor but- the options in the Options menu of a ton to start the program.
Page 85
Options Express Extra clean The Express option reduces the pro- You can select this option to increase gram cycle time. the cleaning performance of the pro- grams. In order to achieve optimum cleaning results, the temperature, and therefore If you activate this option, the program the energy consumption, will increase cycle times and the main wash temper- with this option.
Machine” under “Optional acces- sories”). Follow the dosage recom- mended by the manufacturer on the packaging. Miele cleaning and care products are available to order from Miele Customer Service or from Miele’s online store. Clean the filters in the wash cabinet...
Cleaning and care Hygiene cycle Cleaning the door and the door seal The frequent use of low-temperature wash programs increases the risk of The door seal and the sides of the dish- contamination and odors inside the washer door are not accessed and wash cabinet.
Page 88
Cleaning and care To avoid damaging the external sur- faces, do not use the following: - cleaning agents containing soda, am- monia, acids, or chloride - cleaning agents containing lime scale remover - abrasive cleaning agents, such as scouring powder, scouring liquid, or pumice stones - cleaning agents containing solvents - stainless-steel cleaning agents...
Cleaning and care Turn the AutoDos lid to and open Cleaning the AutoDos assem- Remove the PowerDisk if appropriate. If the Clean AutoDos message is dis- played, check that the fill channel is clean, and clean it if necessary, e.g., powder residues.
Page 90
Cleaning and care Clean the fill channel using water and The AutoDos lid must close tightly so a soft brush if necessary. that the detergent powder does not get wet and clump together. It is very important that no moisture Make sure that all seals are clean.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray-arm jets and bearings. The spray cutlery tray (if present).
Page 92
Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upward to engage the inner ratchet. Then un- Rotate the screw thread of the lower screw the spray arm by rotating the spray arm counterclockwise ...
Page 93
Cleaning and care Reinstalling the spray arms Inserting the cutlery tray (if present) Reinstall the upper spray arm and Slide the cutlery tray back onto the tighten it by hand. rails from the front. Reinstall the middle spray arm. ...
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Turn off the dishwasher. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soil from “Cleaning the spray arms” under the suds solution.
Page 95
Cleaning and care In order to clean the inside of the fil- Rotate the screw thread clockwise ter, pull the microfilter on the plastic until the arrow in the viewing window ring downwards and away from the points to the lock symbol . filter combination.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet af- ter the end of a program, the water has not been pumped away. The drain pump may be blocked by foreign ob- jects. These foreign objects are easy to remove.
Page 97
Cleaning and care Damage due to incorrect clean- ing. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is under- neath the cover. Risk of injury from glass splin- ters.
The circuit breaker has tripped. on with the sensor Reset the breaker (see data tag for the correct fuse button. rating). If the breaker trips again, contact Miele Customer Service. The dishwasher stops The circuit breaker has tripped. during a program.
If the fault message appears again, there is a techni- for additional details. cal fault. Turn off the dishwasher. Close the faucet. Contact Miele Customer Service. Waterproof fault Turn The Waterproof system has reacted. the appliance off, close the ...
“Before using for the first time”) and turn the additional details. dishwasher back on again. If the same fault message appears again, contact Miele Customer Service. The door does not close automatically. The door might be obstructed by an item inside the appliance.
Turn off Turn off the dishwasher. the appliance, close the wa- Turn off the water supply. ter supply and contact Miele Contact Miele Customer Service. Service. The following fault mes- The intake water has not reached the required tem- sage appears during the perature of 115 °F (45 °C) (see “Water intake”...
Frequently Asked Questions Water drainage fault Problem Possible cause and solution The alarm tone is Before remedying the fault: sounding. Turn off the dishwasher. The following message Water-drainage fault. appears on the display: There might be water in the wash cabinet. ...
PowerDisk” under “Detergent”). The following message If the same fault message appears again, contact appears on the display: Miele Customer Service. AutoDos lid open The following message The AutoDos function is active and the PowerDisk is appears on the display: empty.
Page 104
AutoDos in the Options menu of a pro- Miele Service. gram and manually dispensing the detergent via the detergent compartment. If you wish to use AutoDos again, contact Miele Customer Service. At the end of the pro- An empty PowerDisk has been inserted or the Auto- gram, the alarm tone Dos is blocked by residual detergent.
Frequently Asked Questions Spray arm fault Problem Possible cause and solution During the program and The lower spray arm is blocked or the nozzles of the at the end of the pro- lower spray arm are clogged. The AutoDos function gram, the display shows is automatically deactivated during the program be- the following message:...
Turn the lighting back on again (see “BrilliantLight” opened. under “Settings”). Faulty wash cabinet lighting. Contact Miele Customer Service. Detergent residue is left The detergent compartment was still damp when de- in the detergent com- tergent was added.
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking A spray arm is knocking against a wash item. noise in the wash cabi- Carefully open the door and rearrange the wash net. items that are obstructing the spray arm. There is a rattling noise Wash items are not secure in the wash cabinet.
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishware is not The dishware was not loaded correctly. clean. See notes under “Loading the dishwasher”. The program was not powerful enough. Select a more powerful program (see “Program overview”).
Page 109
Frequently Asked Questions Problem Possible cause and solution The dishware is not dry The rinse-aid dosage is set too low or the rinse-aid or utensils and glasses reservoir is empty. are flecked. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see “Rinse aid”...
Page 110
Frequently Asked Questions Problem Possible cause and solution Plastic parts are discol- Natural dyes, e.g., from carrots, tomatoes, or ored. ketchup may be the cause. The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes. ...
Page 111
Frequently Asked Questions Problem Possible cause and solution There are rust stains on The affected items are not corrosion resistant. the utensils. No remedy. Purchase utensils which are dishwasher-safe. A program was not run after reactivation salt was added. Traces of salt have got into the normal wash cycle.
You can register your product and/or Miele dealer or Miele Customer Service. view the manufacturer´s warranty terms and conditions for Miele appliances and You can book a Miele Service Call on- vacuum cleaners at line at www.miele.com/service. www.mieleusa.com. Contact information for Miele Cus- tomer Service can be found at the end of this document.
Miele appliances. - Sparkling results even with stubborn These and many other useful products food deposits can be ordered directly from Miele’s on- line store, Miele Customer Service, or - Combination product with other func- from your Miele dealer. tions such as rinse aid, salt, and...
Page 114
Optional accessories Appliance care Miele cleaning and care products pro- vide optimum care for your dishwasher. Dishwasher cleaner - For use with the Clean Machine pro- gram without detergent dispensing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and asso-...
The intake hose is approx. 5 ft (1.5 m) long. A 5 ft (1.5 m) long, flexible metal extension hose (tested to 2,030 psi/14,000 kPa) is available as an op- tional accessory from Miele specialist retailers or Miele Customer Service.
Page 116
*INSTALLATION* Installation A water supply with 3/8" Compression Risk of damage due to excessive Connection (thread connection of pressure. 9/16" – 24 UNEF) must be provided on A brief increase in the water pressure site. If this type of faucet is not avail- can damage components of the able, only a qualified installer may con- dishwasher.
Other- wise, the drain hose can become clogged. Only use a Miele approved connection piece when extending the drain line. Only use a Miele extension drain hose. The drain hose must not be shortened.
Page 118
*INSTALLATION* Installation Venting the water drainage If the on-site drainage connection is sit- uated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a program can cause the appliance to empty itself of water.
USA: 1-888-99-MIELE(64353) the right side of the door. CDN: 1-800-565-6435 A damaged power cord must only be replaced with a genuine Miele cord Specifications by a Miele service technician. The dishwasher comes equipped with a 4 ft (1.2 m) power cord (measured from...
Page 120
*INSTALLATION* Installation Hardwired electrical connection Prior to making a hardwire con- It is possible to hardwire this appliance nection to the terminal, remove the to an existing power cable. powercord. Otherwise there will be a risk of electric shock from the at- ...
Sound emission testing Prerequisites for sound emission tests Load the dishwasher with 16 standard place settings and use the Normal pro- gram. Setup for sound emission tests The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. ...
Page 122
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Stick the insulating strip onto the front top edge of the toe-kick board .
Page 123
Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Vaughan, ON L4K 4V8 Customer Service & Support www.miele.ca Phone: 888-99-MIELE(64353) Customer Care Centre info@mieleusa.com...
Page 124
G 7911, G 7916 en-US M.-Nr. 11 838 280 / 01...