Advertisement
T E C H N I C A L W H I T E P A P E R
CONTENTS &
NAVIGATION
1
Introduction
2-3
Suggested Configuration: 3D Printed
Cable Rack
3-5
Alternative Configuration: Cables
Tucked in Harness
5
Conclusion
5.
• Use 2x hook and loop cable ties, shown in Image 13, to tie the cable loop to the upper arms of the PC plate
as shown by arrows in Image 14
• Plug the power, USB, and USB Type-C™ cables into the top ports of the PC as shown in Image 14
– Note that the HDMI on the 3-in-1 cable cannot be used
Image 15
• There should be ~2 feet of cable between the top of the PC and the headset as shown in Image 15
c . P ote n t i a l i s s u e s
• The connection between the Link Box and cables is not supported and cable connectors could come
unplugged from the Link Box during use; the power cable has an especially low retention force
• The cable loop and Link Box between the PC plate and harness can result in some discomfort to the
user while wearing the backpack
• The Link Box is not secured and could rattle around and become damaged
4. CONCLUSION
• The 4 meter HTC Vive Pro cable, along with the Link Box and standard cables, can be effectively
managed to allow for use with the HP Z VR Backpack and HP OMEN X Backpacks.
Sign up for updates
hp.com/go/getupdated
Share with colleagues
Advertisement
