Huawei ECC800 User Manual page 57
Data center controller
Hide thumbs
Also See for ECC800:
- User manual (321 pages) ,
- User manual (409 pages) ,
- User manual (237 pages)
Table of Contents
Advertisement
ECC800 Data Center Controller
User Manual
Item
E-label
Indicators
Table 3-38 Description of the indicators on the multi-functional sensor
Indicator
RUN
ALM
RF_Z
Issue 07 (2020-03-16)
Specifications
Supported
Color
Name
Green
Module running
status indicator
Red
Alarm indicator
Green
Communication
status indicator
Copyright © Huawei Technologies Co., Ltd.
Status
Description
Blinking at
The multi-functional sensor
long intervals
successfully registers with
the ECC800 and the software
runs properly (the indicator
blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at
The multi-functional sensor
short intervals
fails to register with the
ECC800 or the
communication fails (the
indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Blinking
The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on
A system failure alarm or
smoke alarm is generated.
Off
No system alarm is
generated.
Steady on
No network parameters exist,
or a network is to be created.
Blinking at
A network is set up, and no
long intervals
node access is allowed (the
indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at
A network is set up, and
super short
node access is allowed (the
intervals
indicator blinks at 10 Hz, on
for 0.05s and then off for
0.05s).
Blinking
The multi-functional sensor
intermittently
is searching for a network
at super short
(the indicator blinks at super
3 Device Description
48
Advertisement
Table of Contents
