Siemens SIMATIC IPC347G Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Industrial PC
  5. SIMATIC IPC347G
  6. Operating instructions manual

Siemens SIMATIC IPC347G Operating Instructions Manual

Hide thumbs Also See for SIMATIC IPC347G:
Table of Contents

Advertisement

Quick Links

Download this manual
SIMATIC
Industrial PC
SIMATIC IPC347G
Operating Instructions
10/2020
A5E50059993-AA
Preface
Product description
Safety instructions
Installing and connecting
the device
Commissioning the device
Operating the device
Expanding and assigning
parameters to the device
Device maintenance and
repair
Technical specifications
Dimension drawings
Standards and approvals
BIOS description
Hardware description
Technical support
Markings and symbols
List of abbreviations
1
2
3
4
5
6
7
8
9
10
11
A
B
C
D

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC IPC347G

Summary of Contents for Siemens SIMATIC IPC347G

  • Page 1 Preface Product description SIMATIC Safety instructions Installing and connecting the device Industrial PC SIMATIC IPC347G Commissioning the device Operating the device Operating Instructions Expanding and assigning parameters to the device Device maintenance and repair Technical specifications Dimension drawings Standards and approvals...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    General knowledge in the field automation control engineering is recommended. Range of validity of these operating instructions These operating instructions are valid for all supplied versions of the SIMATIC IPC347G. History Currently released versions of these operating instructions:...

  • Page 4: Table Of Contents

    Scope of delivery ....................... 28 3.1.2 Checking the delivery package ................... 29 3.1.3 Device identification data ....................29 Mounting the device ......................31 3.2.1 Mounting types ......................... 31 3.2.2 Securing device ......................... 32 Connecting the device ....................... 34 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 5 Installing operating system, software and drivers ............... 65 7.4.1 Installing software and drivers ................... 65 Recycling and disposal ....................... 68 Beep code .......................... 68 Technical specifications ........................69 Applicability of technical specifications ................69 General technical specifications ..................69 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 6 USB 2.0 port ........................105 A.2.3 Serial interface ........................ 106 A.2.4 Ethernet .......................... 107 A.2.5 DisplayPort ........................107 Internal Connector ......................108 A.3.1 Fan connector ......................... 108 A.3.2 Front panel connector (F_Panel1 & F_Panel2)..............109 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 7 Problems when using expansion cards ................117 Markings and symbols ........................118 Overview ......................... 118 Safety ..........................118 Operator controls......................118 Certificates, approvals and markings ................119 Interfaces ........................120 List of abbreviations .......................... 121 Index ..............................123 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 8: Product Description

    Windows® operating Information on: • Supplied data storage medium system • Commissioning the operating • Online at: system Microsoft® Windows® 10 • Restoring the operating system (https://support.industry.siemens. • Configuration of the operating com/cs/ww/en/view/109749498) system SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 9: Product Highlights

    Product description 1.2 Product highlights Product highlights The SIMATIC IPC347G is an industrial PC in 19" rack format design (4U). It is perfectly suited for PC applications with high-level industry functionality. • Powerful processors up to Intel Core i7 (6th generation) •...

  • Page 10: Scope Of Application

    The SIMATIC IPC has CE certification for use in the industrial sector as well as in residential and commercial areas and small businesses. In addition to the industrial applications, therefore, it can also be used in building automation or in public facilities. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 11: External Design Of The Device

    ⑦ Connections for USB 2.0 devices, compatible with USB 1.1 ③ On/off button ⑧ HDD status display ④ Connection for USB 2.0 devices, ⑨ Power status display compatible with USB 1.1 ⑤ Drive bays 3 x 5.25" SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 12: Rear Of The Device

    Air outlet ④ Interfaces ⑤ Extensible interface ⑥ Expansion slots for: • 3 × PCI • 3 × PCIe x4*; Gen 2.0 • 1 × PCIe x16; Gen 3.0 * Open direct plug sockets SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 13: Drive Cage

    5.25" drive or components Components Cover Front right door Additional information Technical notes and information on the rated conditions are available in the section Installation options for drive (Page 50). SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 14: Interfaces And Connections

    USB port in BIOS. On how to disable the USB port, see USB configuration in Advanced menu (Page 86). Use the DP cable of which the length is less than 15 meters, and the DP cable must comply with VESA DisplayPort standard. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 15: Power Supply Connections

    The buttons and switches described in the following do not fully disconnect the device from the line voltage. You also need to the notes and information under "Switching off the device (Page 40)". On/Off switch The following figure shows the location of the on/off switch. ① On/Off switch SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 16 Perform a hardware reset only in the case of an emergency. Close all running programs. Make sure that there is no more read or write access to drives and I/O before performing the hardware reset. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 17: Status Displays

    No accessing access Green flashing Accessing data 1.4.6.2 Status display of the Ethernet interface The Ethernet interfaces are numbered on the enclosure to identify them clearly. The numbering by the operating system can differ. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 18: Internal Construction Of The Device

    Heat sink of the processor ③ Motherboard with slots for memory slots ④ Drive cage ⑤ Motherboard ⑥ Slots for expansion cards ⑦ Card holder for expansion cards ⑧ On the enclosure: Numbering of slots for expansion cards SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 19: Safety Instructions

    Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to cyber threats.
  • Page 20 • Disconnect the device from the power supply in good time when a thunderstorm is approaching. • Do not touch power cables and data transmission cables during a thunderstorm. • Keep sufficient distance from electric cables, distributors and systems. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 21: Disclaimer For Third-Party Software Updates

    Take corresponding precaution measures before you open the device. Disclaimer for third-party software updates This product includes third-party software. Siemens AG only provides a warranty for updates/patches of the third-party software, if these have been distributed as part of a Siemens software update service contract or officially released by Siemens AG.

  • Page 22: Note On Transport And Storage

    • Bring the device to room temperature before starting it up. • Do not expose the device to direct heat radiation from a heating device. • If condensation develops, wait approximately 12 hours or until the device is completely dry before switching it on. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 23: Notes On Mounting

    Touching these areas or components can cause death or serious bodily injury. • Always disconnect the cabinet from the mains before opening it. • Ensure that the power to the control cabinet cannot be turned on accidentally. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 24: Notes On Ambient And Environmental Conditions

    • Install the device in a way that no danger is posed. • Always maintain a minimum clearance of 50 mm to the area of the ventilation slots and do not cover the ventilation slots of the enclosure. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 25: Information On I/O Devices

    • Only connect I/O devices which are approved for industrial applications in accordance with IEC/EN 61000-6-2 and IEC/EN 61000-6-4. • I/O devices that are not hotplug-capable may only be connected after the device has been disconnected from the power supply. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 26: Notes On Device And System Extensions

    • Always disconnect the power plug before you open the device. • Only install device or system expansions designed for this device. • Observe the information on "Electromagnetic compatibility" provided in the technical specifications. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 27 • UL approval of the device only applies when the UL-approved components are used according to their "Conditions of Acceptability". • We are not liable for functional limitations caused by the use of third-party devices or components. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 28: Installing And Connecting The Device

    • Software and tools to recover your ordered Microsoft® Windows® operating system • Device drivers for installation in operating systems • SIMATIC IPC347G Quick Install Guide • SIMATIC IPC347G Operating Instructions • Operating instructions for your ordered Microsoft® Windows® operating system on this...

  • Page 29: Checking The Delivery Package

    The device can be clearly identified with the help of this identification data in case of repairs or loss. The following illustrations are examples. The data of your device may differ from the data in these examples. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 30 COA label The COA label (Certificate of Authenticity) is located inside the front door. Note The COA label is only available for devices delivered with Microsoft® Windows® operating system installed. Example of the COA label: SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 31: Mounting The Device

    • The minimum distance between the device and the housing is 10 cm on the air output end. • Ensure that the installed device does not pose a danger, for example, hit someone by falling over. • All the external circuit of the device must be SELV circuit. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 32: Securing Device

    Touching these areas or components can cause death or serious bodily injury. • Always disconnect the cabinet from the mains before opening it. • Ensure that the power to the control cabinet cannot be turned on accidentally. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 33 The figure below shows the position of the mounting holes for angle brackets or telescopic rails. ① Threaded holes for 3A68-508APZZ3CEB 84H341300 telescopic rails from the compa- ny KING SLIDE WORKS CO., LTD or other telescopic rails match the dimensional and technical requirements. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 34: Connecting The Device

    • Type SJT with three conductors • Conductor cross-section ≤ 18 AWG • Cable length ≤ 4.5 m 220V supply voltage • Type RVV with three conductors • conductor cross-section ≤ 18 AWG • Cable length ≤ 4.5 m SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 35: Connecting The Function Earth

    2. Firmly attach the cable lug to the function earth connection on the device using the M4 thread (see part labeled). 3. Connect the function earth to the protective conductor connection of the cabinet or the plant in which the device is installed. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 36: Connecting The Power Supply

    2. Insert the power cable in the corresponding electrical socket. Information on the position of the socket is available in "Power supply connections (Page 15)". 3. Insert the power cable in the electrical socket. 4. Switch the on/off switch to on (position " | "). SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 37: Connecting I/O Devices

    • Audio device with line in • Headphones • Microphone • Headset (with headphones and microphone) with the following standards: – OMTP: Standard for audio devices from Nokia, etc. – CTIA: Standard for audio devices from Apple® SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 38: Connecting Device To Networks

    The software package and the documentation are not included in the scope of delivery. Additional information You can find additional information on the Internet at: Technical support (https://support.industry.siemens.com) 3.3.6 Dual-monitoring You can operate on up to two monitors with the VGA and DP cables.

  • Page 39: Commissioning The Device

    "Operator controls (Page 15)". The green POWER LED lights up. The module carries out a self-test. 2. Follow the instructions on the screen. Press <ESC> or <DELETE> to enter setup. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 40: Switching Off The Device

    • Shut down the operating system and unplug the power plug from the rear of the device, see "Power supply connections (Page 15)". The device is switched off and fully disconnected from the mains voltage. No trickle current is flowing. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 41 • Press the on/off button for more than 4 seconds. – The unit switches off. – Press the power button again to turn the device back on. Information on the position of the buttons is available under "Operator controls (Page 15)". SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 42: Operating The Device

    Operating the device Opening the front door Procedure 1. Unlock the front door with the key ①. 2. Open the front right door in the direction of the arrow. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 43: Monitoring Functions

    • CHA Fan2 Control [Auto Mode]: Chassis Fan speed change based on mother board tem- – perature. [Silent Mode]: Chassis Fan speed keep stable and no noise. – [Disabled Mode]: Uses Maximum speed – SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 44: Expanding And Assigning Parameters To The Device

    • The front door is open; see "Opening the front door (Page 42)". • The device is fully disconnected from the line voltage, see "Switching off the device (Page 40)". • All connection cables are unplugged. • PH2 screwdriver SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 45 Expanding and assigning parameters to the device 6.1 Open the device Procedure 1. Remove the retaining screws ①. 2. Move the cover in the direction as the arrow. 3. Lift the cover from the back and remove it. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 46: Expansion Cards

    • You are familiar with the information on expansion cards and the conditions of use of expansion cards, see "Useable expansion cards (Page 46)". • The device is open, see important information in "Open the device (Page 44)". SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 47 1. Remove the retaining screw and remove the card holder. 2. Remove the slot bracket of the slot for the expansion card. 3. Insert the expansion card into the slot. 4. Secure the expansion card with the designated screw. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 48: Memory Modules

    The table below shows the supported memory types of motherboard. Module type Module Size Description DDR4‐SDRAM 4 GB DDR4-2133Mhz-512M x 64-UDIMM-288 pin DDR4‐SDRAM 8 GB DDR4-2133Mhz-1G x 64-UDIMM-288 pin DDR4‐SDRAM 16 GB DDR4-2133Mhz-2G x 64-UDIMM-288 pin SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 49: Installing Memory Modules

    • A memory module can be installed only when the direction is correct. Switch the direction if the memory cannot able to be inserted into the memory socket. • DDR2 and DDR3 memory modules are not compatible. Please make sure to install DDR4 Memory Module on this motherboard. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 50: Drives (Hdd/Ssd)

    If the device is permanently installed, mounted on telescopic rails, it can only be subjected to the vibration stresses described below during operation. The maximum permitted power loss of the expansion cards is 75 W. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 51: Removing The Drive Module

    • The device is fully disconnected from the line voltage, see Switching off the device (Page 40). • PH2 screwdriver Procedure 1. Unlock the front door and open the right-front door. 2. Remove the top cover. 3. Disconnect the power supply and data cables. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 52: Installing The Drive (Hdd/Ssd)

    • The device is fully disconnected from the line voltage, see "Switching off the device (Page 40)". • The device is open, see important information in "Open the device (Page 44)". • The drive bay is taken out of the chassis. • PH2 screwdriver SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 53 • Recommend installing the hard disk in the middle slot of the drive module. 3. Install the driver cage again. 4. Connect the power and data cables to the drive. 5. Install the drive bay according to the reverse steps of removing the drive bay. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 54: Removing And Installing Internal Hdd/Ssd

    Loosen the four screws ① on the drive bay plate and remove the hard disk from the drive bay. Procedure for installing the hard disk drive Place the hard disk onto the drive bay plate and secure the drive with four screws ①. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 55: Device Maintenance And Repair

    PC components that are subject to wear. The table below indicates the intervals for this replacement. Component Replacement interval Drives 3 years Backup battery 5 years 5 years Filter pad Depending on the degree of soiling SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 56: Removing And Installing Hardware

    4. Pull the marked screw to open the fan bracket. 5. Remove the filter in the direction of the arrow. Procedure - Installing the filter To install the filter, follow the steps for removing it in reverse order. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 57: Replacing The Device Fan

    Procedure - Installing the fan To install the fan, follow the steps for removing it in reverse order. During installation, make sure that the arrow on the fan points away from the fan bracket. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 58: Changing The Backup Battery

    – Rated voltage: 3 VDC – Max abnormal charging current: 10 mA • For any requirements on product maintenance, contact Siemens Technical support (Page 114). • Do not throw lithium batteries into fire, do not solder on the cell body, do not recharge, do not open, do not short-circuit, do not reverse polarity, do not heat above 100°C and...
  • Page 59 – Courant de charge anormal max. : 10 mA • Pour toute demande concernant la maintenance du produit, contactez le support technique (Page 114) Siemens. • Ne jetez pas au feu des piles au lithium, n'effectuez pas de soudage sur la pile, ne la rechargez pas, ne l'ouvrez pas, ne la court-circuitez pas, n'intervertissez pas les pôles, ne...

  • Page 60: Changing The Power Supply

    • The device is fully disconnected from the line voltage, see "Switching off the device (Page 40)". • The device is open, see important information in "Open the device (Page 44)". • An original spare part, for example, a power supply with the same type. • PH2 screwdriver SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 61 7. Connect the cables to the drives and the motherboard. 8. Use cable ties to reattach the power supply cables to the enclosure. 9. Close the device. 10.Check the safe state of the device. 11.Switch on the power supply. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 62: Replacing The Processor

    • Operate the processor only at a clock frequency that is equal to or less than the permitted clock frequency. Procedure 1. Unlatch the fan rack on the heat sink and remove it. 2. Remove the highlighted fan connector. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 63 7. Install the new processor on the socket, as shown in the figure. When installing the CPU, make sure you aligned the highlighted arrow on the processor with pin 1 in the CPU socket. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 64: Replacing The Motherboard

    Processor type and clock frequency If you use a processor of a different type, perform the BIOS update firstly. During the BIOS update, the microcode matching the processor is loaded. Contact the SIEMENS support to update the BIOS if you changed a different processor.

  • Page 65: Installing Operating System, Software And Drivers

    • Windows 10 operating system is installed in your IPC. • You need to connect a mouse, a monitor and a keyboard to your PC. • You also need the supplied USB stick to your PC. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 66 4. Click Accept to accept the license agreement. 5. Click Install to allow the computer to start the installation. The installation starts. 6. Click Yes to confirm the user account control question. 7. Click Finish. The chipset installation is completed. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 67 3. Click Yes to confirm the user account control question. 4. Click Next to continue. 5. Click Yes to accept license agreement. 6. Click Next to confirm the Readme File Information and move on. The installation starts. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 68: Recycling And Disposal

    Contact a certified disposal service company for environmentally sound recycling and disposal of your old devices. Beep code Beeps Description 1 short beep Power on correctly 4 short beeps Memory error 5 short beeps Keyboard error SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 69: Technical Specifications

    Degree of protection • IP 20 on the rear according to IEC 60529 Safety Protection class Protection class I compliant with IEC 61140 Degree of pollution Device is designed for environments with pollution degree 2 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 70: Current/Power Requirements And Power Supply

    82% (230 V AC/120 V AC) with full (100%) or light load (20%) Depends on the selected device configuration. The max. permitted accumulated power of the +5 V and + 3.3 V is 130 W. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 71: Technical Specifications Of Basic Power Supply

    ± 2 kV shielding-to-earth; according to IEC 61000-4-5; surge; length > 30 m Immunity to discharges of static ± 4 kV contact discharge (according to IEC 61000-4-2) electricity ± 8 kV atmospheric discharge; (according to IEC 61000-4-2) SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 72: Ambient Conditions

    With SSD: Half-sine: 150 m/s2, 11 ms, 3 shocks per axis Storage/transport Half-sine; 250 m/s ; 6 ms; 1000 shocks per axis Special features Quality assurance In accordance with ISO 9001 Altitude of operation (m) Up to 2000 m SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 73: Technical Specifications Of The Drives

    40 °C, permissible Power loss of all slots with max. am- ≤ 75 W bient air temperature 40 °C, permissi- In sum, the current for 3.3 V may not exceed 1.2 A. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 74: Technical Specifications Of Graphic

    2 × USB 2.0 (500 mA, 2-pin header) Ethernet 2 × Ethernet interface (RJ45, 10/100/1000 Mbps) Wake on LAN, remote boot supported. Audio Realtek® ALC887, 5.1 channels, high definition audio codec. • Micro • Line In • Line Out SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 75: Technical Specifications Of The Telescopic Rails

    160 GB NTFS, not compressed Fourth Data Remainder NTFS, not compressed 8.12 Directives and declarations 8.12.1 Electromagnetic compatibility, Industrial and Residential Areas Electromagnetic compatibility This product meets the requirements of EC Directive 2014/30/EU "Electromagnetic Compatibility". SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 76: Esd Guideline

    The material with which an electrostatically-charged person comes into contact is of particular significance. The figure shows the maximum electrostatic voltages with which a person is charged, depending on humidity and material. These values conform to the specifications of IEC 61000-4-2. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 77 This way, the discharge energy does not reach and damage the sensitive components. – Discharge your body electrostatically by touching grounded metallic parts before you take a measurement at a module. Always use grounded measuring instruments. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 78: Dimension Drawings

    Dimension drawings Front view and top view All dimensions in mm. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 79: Dimension Drawing Of The Expansion Cards

    Dimension drawing of the expansion cards Long PCI card, PCIe card Dimension drawing of the telescope rails Dimensions for bore holes for telescopic rails Dimensions: mm T1=Tolerances of ± (0.1mm)/(0.004") T2=Tolerances of ± (0.3mm)/(0.01") SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 80: Standards And Approvals

    4:2007 + A1:2011, EN 61000-6-2:2005 EN 61010-2-201:2013; EN 61131-2:2007; EN 61010-1:2010 ISO 9001 certificate The Siemens quality management system for all production processes (development, production and sales) meets the requirements of ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. Certificate registration no. 01 100 1430201, 01 104 1430201 and 01 113 1430201.
  • Page 81 Avis Canadien Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Responsible party for Supplier's Declaration of Conformity Siemens Industry, Inc. Digital Factory - Factory Automation 5300 Triangle Parkway, Suite 100 Norcross, GA 30092 Mail to: (amps.automation@siemens.com)
  • Page 82 This product meets the requirements of India certification. BSMI This product meets the requirements of CNS14336-1(099/09/30), CNS13438(095/06/01) generic standard. 警告使用者： 本產品是甲類的資訊產品，在居家的環境中使用時，可能會造成射頻干擾，在 這類情況下，使用者會被要求採取某些適當的對策。 WEEE label (European Union) Disposal instructions, observe the local regulations and the section "Recycling and disposal (Page 68) ". SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 83: Bios Description

    1. Power on the device. 2. Press DELETE or ESC key on your keyboard during the Power - On - Self - Test (POST) when the SIEMENS logo is shown on screen. The Aptio TSE main BIOS setup menu is displayed.
  • Page 84 • Save & Exit: For selecting the exit options and loading default settings. Function description fields Function description fields are at the top right corner of the menu screen and a brief description of the selected item. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 85: Main Menu

    The Main menu The Main menu provides you an overview of the basic system information, and allows you to set the system date and time. Note Take the BIOS version installed on your IPC as standard. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 86: Advanced Menu

    The Advanced menu allows you to change the settings for the CPU and other system devices. Note Be cautious when changing the settings of the Advanced menu. Incorrect field value can cause the system to malfunction. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 87 Select DVMT 5.0 Pre_Allocated (Fixed) Graphics Memory size used [128M] • [32M] [64M] by the Internal Graphics Device. [96M] ~ Memory [1024M] Audio Con- Enable or disable the Azalia HD audio controller. [Enabled] • [Enabled] troller • [Disabled] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 88 [Enabled] Hot Plug • [Disabled] SATA6G_3 Enable or disable the SATA port SATA6G_3. [Enabled] • [Enabled] • [Disabled] SATA6G_3 Enable or disable the SATA6G_3 Hot Plug Support. [Disabled] • [Enabled] Hot Plug • [Disabled] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 89 Enable or disable resume from S5 state via PS2. [Disabled] • [Enabled] S5 via PS2 • [Disabled] Resume from Enable or disable resume from S5 state via USB. [Disabled] • [Enabled] S5 via USB • [Disabled] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 90 [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] COM2 Control When you set the Serial Port 2 to [Ena- [RS232] • [RS232] bled], this item allows you to select the • [RS422] COM2 mode. • [RS485] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 91 • [Disabled] INTEL LAN1_X1P1 Enable or disable the INTEL LAN1_X1P1 PXE OPROM. [Enabled] • [Enabled] PXE OPROM • [Disabled] INTEL LAN2_X2P1 Enable or disable the INTEL LAN2_X2P1 Controller. [Enabled] • [Enabled] Controller • [Disabled] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 92 [Disabled] • [Enabled] mode • [Disabled] PCIEX4 Lane Configuration Set the PCIEX4 Lane. [1×2 2×1 Port] • 1×2 2×1 Port • 1×4 Port PCIEX4_1 Enable or disable the PCIEX4_1. [Enabled] • [Enabled] • [Disabled] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 93: Hardware Monitor Menu

    None None temperature displays the air outlet temperature. CPU / CHA The onboard hardware monitor automatically detects and None None Fan Speed displays the CPU / chassis fan speeds in rotations per minute (RPM). SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 94: Boot Menu

    Boot menu The Boot menu allows you to change the system boot options. Boot Configuration In the Boot Configuration page, you can modify the boot up screen between POST message and SIEMENS logo. System parameters Function description Configuration options Default setting Fast Boot Change the boot speed.
  • Page 95 [UEFI Hard Disk] BOOT Boot Option #2 [UEFI USB Device] • [UEFI USB Device] order Boot Option #3 [UEFI Network] Priori- • [UEFI Network] ties(UEFI Boot Option #4 [UEFI CD/DVD] • [UEFI CD/DVD] mode) • [Disabled] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 96: Security Menu

    Note • Select the boot device during system startup, and press <F10> when SIEMENS Logo appears. • Access Windows OS in Safe Mode, press <F8> after POST.
  • Page 97 BIOS description 11.6 Security menu If you have set an administrator password, Siemens recommends that you enter the administrator password for accessing the BIOS. To set an administrator password: 1. Select Administrator Password item with the arrow keys and press Enter key.
  • Page 98 TCG_1-2: the compatible mode for Win8/Win10. TCG_2: Support new TCG2 protocol and event format for Win10 or later. Physical Presence Spec Ver- Select the PPI Spec version [1.3] • [1.2] sion 1.2 or 1.3. • [1.3] SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 99: Save & Exit Menu

    Press Enter to save setup profile to file system drive. Save Setup Profile to File Sys- tem Drive Load Setup Profile from File Press Enter to load setup profile from file system drive. System Drive SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 100: Hardware Description

    ② CPU Fan and processor ③ Slots for memory modules ④ Backup battery Technical features of the motherboard Technical features of the motherboard can be found under "Technical specifications of the motherboard (Page 73)". SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 101: Position Of The Interfaces On The Motherboard

    ⑤ USB 2.0 vertical port ⑭ ⑥ TPM pin header ⑮ COM1 COM2 ⑦ SATA 3 (Port 3) ⑯ ⑧ SATA 2 (Port 2) ⑰ USB 3.0 ⑨ SATA 1 (Port 1) ⑱ Microphone Line OUT Line IN SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 102: Jumpers

    • The screws are not allowed to connect with motherboard circuit or components. The motherboard can be damaged by this action. • Do not leave the screws or the metal components on the motherboard or inside of the chassis. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 103 Clear CMOS (CLRTC) NOTICE Set the jumper back to protected mode after clearing CMOS. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 104: External Interfaces

    Connector Description Assignment COM1, COM2 9-pin standard plug USB 3.0 Type A LAN1_U31G1_12, USB3 Port 0, 1; USB2 Port 0, 1 interface LAN2_U31G1_34 side Ethernet 1 and 2 LAN1_U31G1_12, RJ45 LAN2_U31G1_34 20-pin DisplayPort connector SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 105: Usb 3.0 Port

    Input Data channel USB3 Input Ground – Data channel USB3 Output Data channel USB3 Output A.2.2 USB 2.0 port Short description Meaning USB_P5V_fused (O) +5 V, fused USB_D0M (I/O) Data– USB_D0P (I/O) Data+ USB_GND SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 106: Serial Interface

    Receive data - (I) for full-duplex mode Signal ground Pin assignment RS485 Short description Meaning Data- Transmit / receive data - (I/O) for half-duplex mode Data+ Transmit / receive data+ (I/O) for half-duplex mode Signal ground SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 107: Ethernet

    The Ethernet interface supports MDXI (auto crossover) for all transmission rates. A.2.5 DisplayPort DisplayPort interface Pin no. Abbreviation Meaning Input/output ML_Lane3- DP data 3- Input Ground ML_Lane3+ DP data 3+ Input ML_Lane2- DP data 2- Input SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 108: Internal Connector

    AUX_CH- Auxiliary channel- Bidirectional Hot Plug Detect output Ground DP_PWR +3.3 V (fused) power out Internal Connector A.3.1 Fan connector The pin assignment in the table below applies to all fan connectors on motherboard. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 109: Front Panel Connector (F_Panel1 & F_Panel2)

    The front panel connector is used to connect cable to Chassis Front Panel, and provide HDD LED, Power LED, Power Button and Reset Button functions. A.3.3 Internal USB 2.0 connector (USB56 & USB78) Internal USB 2.0 Connectors provides two USB 2.0 Ports which require appropriate cable to support. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 110: Internal Rs232 Com Connector (Com3 & Com4)

    Internal RS232 COM Connector (COM3 & COM4) Internal COM Connectors provides two RS232 Ports which require appropriate cable to support. A.3.5 Internal USB 2.0 Vertical Connector (USB9 & USB10) Internal USB 2.0 Vertical Connectors provides two Type-A USB 2.0 Ports. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 111: Internal Tpm 14-Pin Connector

    ATX Power 24‐Pin connector is for ATX PSU plug. Make sure you insert the ATX PSU plug on motherboard in the right orientation, otherwise the plug cannot be inserted. Note ATX Power 4‐Pin connector must be connected, otherwise the system cannot be turned on. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 112: Atx Power 4-Pin Connector (Eatx_Pwr2)

    This slot only supports type 2242/2280 SATA storage devices. A.3.10 Intel CPU socket (LGA1151) Intel CPU Socket is for Intel 1155 Pin CPU. Refer to the CPU installing section Replacing the processor (Page 62) for detailed information. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 113: Ddr4 Memory Sockets (Dimm_A1 & Dimm_B1)

    The motherboard provides four pieces of 7‐pin SATA Port Connectors, which support SATA devices through the connection of SATA Cable. A.3.13 Battery socket The Battery Socket on the motherboard is for CR2032 Battery used for COMS data retention. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 114: Technical Support

    Tools & downloads Please check regularly if updates and hotfixes are available for download to your device. The download area is available on the Internet at the following link: After Sales Information System SIMATIC IPC/PG (http://www.siemens.com/asis) SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 115: Troubleshooting

    2. Set the date and the time in the "Main" tab. Time and date are wrong even The backup battery is dead. Replace the backup battery. after correctly setting them in the firmware (BIOS) SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 116: Problems When Booting The Device

    You can find the files and descriptions needed for GPT data storage medium is this on the supplied data storage medium. aborted with the following error message: "Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible" SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 117: Problems When Using Expansion Cards

    Different pin assignment expansion card and restart the device. If the error no longer occurs, the expansion card was the cause of the fault. Replace this with a Siemens expansion card or contact the supplier of the ex- pansion card.

  • Page 118: Markings And Symbols

    Opening for Kensington lock opening Attention ESD (Electrostatic sensitive Warning of hot surface device) Operator controls Symbol Meaning Symbol Meaning On/off switch, without electrical isola- Eject CD/DVD tion On/off switch, without electrical isola- tion SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 119: Certificates, Approvals And Markings

    Commission for the USA EFUP (Environment Friendly Use Peri- Approved for Korea Certification (KC) od) marking for China Test mark of the Underwriters Labora- Disposal information, observe the tories local regulations. Approval for India BIS Certification SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 120: Interfaces

    LAN interface, not approved for con- Line Out necting WAN or telephone Serial port Microphone input USB port Universal Audio Jack USB 2.0 high-speed port Headphone output USB 3.0 super-speed port USB 3.1 SuperSpeedPlus interface SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 121: List Of Abbreviations

    Extensible Firmware Interface Components sensitive to electrostatic charge European standard Hard Disk Drive Hard disk drive Height unit Input/Output Data input/output on computers iAMT Intel® Active Management Technology International Electrotechnical Commission Ingress Protection Degree of protection SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 122 ITU-T standardized recommendation for data transfer via serial ports Positive supply voltage of integrated circuits VEST Video Electronics Standards Association Video Graphics Array Video adapter which meets industrial standard Watchdog Program monitoring with error detection and alarming. SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

  • Page 123: Index

    Network, 38 Front door Connecting the function earth, 35 Opening, 42 Connections, (Interfaces) function earth, 35 Connecting, 35 Country-specific information, 34 Data exchange, 38 General technical specifications, 69 Degree of protection, 69 Graphic controller, 74 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 124 Configuration, 62 Processor type, 64 Product label and component label, 30 PROFINET, 38 Main memory, 73 Protection class, 69 Manuals, 8 Protective measure Memory modules Static electricity, 77 Installing, 49 Slots on motherboard, 73 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 125 Hardware reset, 41 Shutting down the operating system, 40 Switching on Switching on the device, 39 Telescopic rails Mounting holes, 33 Technical specifications (basic configuration), 75 Transportation, 22 USB 2.0 Port, 105 USB 3.0 Interface, 105 SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...
  • Page 126 Index SIMATIC IPC347G Operating Instructions, 10/2020, A5E50059993-AA...

Table of Contents