4-3. Replacement of Fan
n
Check in advance whether the screw captivating measure has been taken or not in the rear parts. (Refer to
Section 4-1-2.)
1. Remove the two screws (PSW3 x 8). Or, loosen the two screws (B3 x 10, with drop prevention).
2. Open the fan cover in the direction of the arrow, then disconnect the two harnesses from the relay
connector.
Fan cover
4-4 (E)
Screws
In this illustration, the screw captivating
measure has not been taken.
Harnesses
Relay connector
ZRD-1/ZRD-2