Table of Contents
Advertisement
Clean Circulation Air Filter
1. Remove the filter:
Remove screw (7) under cup holder (6) and tilt the cup
holder forward. While pushing circulation air filter (9)
downward, remove circulation air filter (9) from stoppers
(8).
WARNING: When using compressed air pressure, wear
safety glasses or goggles.
IMPORTANT: If compressed air delivery pressure is high,
damage to the filter fins may result. Always
use compressed air at the lower pressure
than 0.2 MPa (2kgf/cm
away from the core surface more than 500
mm.
2. Clean circulation air filter (5) using compressed air or by
washing with water. Washing procedure with water is as
follows:
2.1 Use tap water.
2.2 Submerge the filter in water containing a neutral deter-
gent for about 5 minutes.
2.3 Clean the filter with water again.
2.4 Sufficiently dry the filter.
3. Install the cleaned circulation air filter or a new filter by
following the filter removal procedure described in step 1
in the reverse order.
MAINTENANCE
2
). Keep the nozzle
7-91
6
7
M4GB-07-106
8
9
M4GB-07-109
Advertisement
Chapters
Table of Contents
