Re-Registering The Template - Panasonic MICRO-IMAGECHECKER AX40 User Manual
Hide thumbs
Also See for MICRO-IMAGECHECKER AX40:
- Brochure (12 pages) ,
- Brochure & specs (15 pages) ,
- User manual (15 pages)
Table of Contents
Advertisement
10.2.5 Re-registering the Template
Overview
This is a function to update the template (base image) of the target checker by inputting signals from the
external device. When the signals are input, the template is updated based on the current image or
memory image. The number of the target checker to be re-registered and assigned to IN 1- 7 is specified
and the template is re-registered upon FCT2 signal input.
Target Checker
• Smart Matching
• Contour Matching
Re-register Mode
There are the following two modes for re-registration. For mode setting, select "Template Settings" from
the ENVIRONMENT menu.
• Setting Position
Re-registering can be executed at the position of the preset template area. This mode is available if
the re-registration position of the object is the same as the setting position of the target checker.
• Adjustment Position
If "Position Adjustment" is set to any other number than "0", this mode re-registers the template at the
adjustment position of the target checker after position adjustment or rotation adjustment is executed
and the target checker is adjusted. This mode will be available if the position of the re-registration
position of the object is not the same as the setting position of the target checker.
Area Display
This is a function to check the area to be re-registered on the monitor screen before re-registration after a
timing signal for executing re-registration and FCT2 signal are input. In this case, it is required to input
timing signals (or commands) to re-register twice. The area can be set by selecting "ENVIRONMENT" >
"Template Settings" from the menu bar.
Specifying the Number of Checker To Register
Assign the number of the target checker you want to re-register to IN1 to 7 (7 bit). Specify the value
subtracted one from the actual product type number using binary data. Refer to the table shown below.
214
Advertisement
Table of Contents
