Table of Contents
Advertisement
WB DATA TRANSFER (XBR-55/65A1E)
1. In "Panel/PQ" service mode.
a. Go to "WB/Mura/CUC data transfer" category by "↑" or "↓" button.
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Tuner
Wi-Fi / BT
SDB Service Menu
b. To select "WB/Mura/CUC data transfer", press "→" button.
c. To change data, press "←" or "→" button on remote.
Panel / PQ
Back
WB Adjustment
WB/Mura/CUC data transfer
XBR-55/65/77A1E
>>
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
<<
>>
>>
[</>] Set [Home]Exit
2. In "WB/Mura/CUC data transfer".
a. Select "WB/Gamma data transfer" by pressing "↑" or "↓" button on remote.
b. To change the items, press "←" or "→" button on remote and press "Enter" button.
Selectable items are:
0. SoC to T-con
1. T-con to SoC
2. Not action
c. "Mura data transfer" and "CUC data transfer" are also displayed on the menu, but Mura
and CUC function do not work on KA55/65 model.
Please skip these items by pressing "↓" button on remote.
d. Select "[start]" and press "Enter" button to start transfer.
Back
WB / Gamma data transfer
<[ 0.Soc to T-con ]>
Mura data transfer
<[ 0.Soc to T-con ]>
CUC data transfer
<[ 0.Soc to T-con ]>
* Disuse in KA model
Start
* Only KA77 uses
*Please refer to another manual "Service Procedure for Panel, Board and Software Change /
Upgrade(P/N:98881800x)" for details. GN3TR chassis is the same as GN1T chassis basically.
ADJUSTMENT
<<
"CUC data transfer".
[</>] Set [Home]Exit
B-board
T-con
replace
replace
WB/
1.T-con to
0.SoC to
Gamma
Soc
T-con
1.T-con to
0.SoC to
Mura
Soc
T-con
Disuse
1.T-con to
0.SoC to
CUC
Soc
T-con
Panel
replace
0.SoC to
T-con
1.T-con
to Soc
1.T-con
to Soc
17
Hide quick links:
Advertisement
Table of Contents
