Table of Contents
Advertisement
2 Solution
2.4
Reading inputs from a slave LOGO! and controlling
outputs of a slave LOGO!
When the master/slave mode is set, you can read inputs from a slave LOGO! and
control outputs of a slave LOGO!.
The table below describes the LOGO! program settings for this:
Table 2-13
No.
Action/response
1.
Start LOGO! Soft Comfort V8.
Click in the Mode bar on "Network Project" to
2.
open the project mode.
Click on "Add new device". The subsequent
3.
window enables you to add devices you want
to use to the network (in this example a
master and a slave LOGO!).
The "Network view" gives you an overview of
4.
the devices used in your network (in this case
a master and a slave LOGO!).
5.
Now, go to the diagram in the "diagram
editor".
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308,
V2.2,
09/2018
LOGO! Soft Comfort V8
15
Hide quick links:
Advertisement
Table of Contents
