Table of Contents
Advertisement
Preparing for use
4.5 Transport and storage
Alternative rotor bracing
● If you transport the machine after the output element has been pulled on, then you must
axially fix the rotor in another way.
①
Figure 4-1
Tightening torques for other rotor shipping brace types
● The thread in the shaft extension indicates the rotor weight. This indirectly specifies the
required preload force when axially fastening the rotor.
Axial preload force for other rotor shipping brace types
Storing the rotor locking device
Store the rotor locking device in a safe place. It must be remounted if the machine is
removed and shipped on further.
40
Sleeve
Axial fastening of the rotor
Thread in the shaft extension
M16
M20
M24
M30
Thread in the shaft extension
M16
M20
M24
M30
②
Shaft screw and washer
Tightening torque
40 Nm
80 Nm
150 Nm
230 Nm
Preload
13 kN
20 kN
30 kN
40 kN
1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 06/2020, A5E44455710A
Advertisement
Table of Contents
