Advertisement
Names & functions
Core
This control device acts like the brain of the robot, which makes it come to life.
Multi LED
This LED shows different status with different
colors. You can control it by coding.
Input port
Connect the sensor blocks (light sensor, push
switch, IR photoreflector and accelerometer)
here.
Output port
Connect the motor blocks (DC motor, servo
motor), LEDs and buzzers here.
*1. Interoperability and compatibility among Bluetooth devices vary.
Core buttons
These buttons can do different
things, depending on the code.
*1
USB / Bluetooth® LED
The blue LED is for Bluetooth
connection and the green LED
is for USB connection.
USB port
Use a USB cable to connect a
compatible device to this port.
Power LED
This LED shows if there is
power being supplied to the
power connection port.
Power connection port
Connect the battery box.
Status LED
This LED shows the status of
the core.
Battery box
How to install batteries
You will need 3 alkaline batteries (1.5V AA/LR6)
cross-head screwdriver.
Remove the
1
screw with a
cross-head
screwdriver.
Place the
3
batteries in.
Make sure to
put them in the
right direction.
*2. Batteries not included.
Power switch
Flip the switch to turn the power supply
on & off to the core.
*2
and a
Slide the cover
2
as shown by
the arrows.
Place the
4
cover back and
tighten the
screw.
Advertisement
